Valid

JB/T 14314-2022Piston flow control valves (English PDF)

活塞式调流阀

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for JB/T 14314-2022 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 20, 2022

Implementation date

April 1, 2023

Scope

JB/T 14314-2022 is the English-translated version of 活塞式调流阀.

JB/T 14314-2022 is the Chinese standard "Piston flow control valves". Its scope clause reads: This document specifies the terms and definitions, structure types, model designation, parameters, technical requirements, test methods, inspection rules, marking, and packaging, protection and storage for plunger flow control valves.

This document applies to manufacture of the plunger flow control valves of PN6 ~ PN25 in the nominal pressure and DN100 ~ DN2000 in the nominal size, using water as the working medium at 0 °C ~ 80 °C. Its clauses include terms and definitions; structure types, model designation and parameters.

Found what you need?

Document preview — JB/T 14314-2022

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Structure types, model designation and parameters
  • 4.1 Structure types
  • 4.2 Model designation
  • 5 Technical requirements
  • 5.1 Structure requirements
  • 5.2 Performance requirements
  • 5.3 Connection end
  • 5.4 Valve body
  • 5.5 Structure length
  • 5.6 Plunger
  • 5.7 Valve seat
  • 5.8 Stem
  • 5.9 Stem bearing
  • 5.10 Stem seal
  • 5.11 Motive seal of plunger
  • 5.12 Main seal
  • 5.13 Crank rocker drive mechanism
  • 5.14 Drive
  • 5.15 Material
  • 5.16 Welding
  • 5.17 Non-destructive testing
  • 5.18 Repair
  • 5.19 Appearance quality
  • 5.20 Requirements for drinking water service conditions
  • 5.21 Ordering requirements
  • 6 Test methods
  • 6.1 General
  • 6.2 Shell test
  • 6.3 Sealing test
  • 6.4 Pressurized opening operation test
  • 6.5 No-load operation test
  • 6.6 Measurement of shell wall thickness
  • 6.7 Non-destructive testing
  • 6.8 Inspection of valve body material
  • 6.9 Flow coefficient inspection
  • 6.10 Inspection of deviation of rated travel
  • 7 Inspection rules
  • 7.1 End-of-manufacturing inspection
  • 7.2 Type inspection
  • 8 Marking
  • 8.1 Marking contents
  • 8.2 Markings on the nameplate
  • 8.3 Body marking
  • 9 Packaging, protection and storage
  • 9.1 Packaging and protection
  • 9.2 Storage
  • Annex A (Normative) Minimum wall thickness of the outer layer of iron valve body
  • Annex B (Informative) Structural length
  • Annex C (Informative) Order data sheet

1 Scope

This document specifies the terms and definitions, structure types, model designation, parameters, technical requirements, test methods, inspection rules, marking, and packaging, protection and storage for plunger flow control valves.

This document applies to manufacture of the plunger flow control valves of PN6 ~ PN25 in the nominal pressure and DN100 ~ DN2000 in the nominal size, using water as the working medium at 0 °C ~ 80 °C.

2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T150.4 Pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance

GB/T 152.4 Fasteners - Counterbores for hexagon bolts and nuts

GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature

GB/T 700 Carbon structural steels

GB/T 1176 Casting copper and copper alloys

GB/T 1220 Stainless steel bars

GB/T 1591 High strength low alloy structural steels

GB/T 3098.6 Mechanical properties of fasteners - Stainless steel bolts, screws and studs

GB/T 4237 Hot rolled stainless steel plate, sheet and strip

GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous

GB/T 9124.1 Steel pipe flanges - Part 1: PN designated

GB/T 12220 Industrial valves - Marking

GB/T 12221 Metal calves - Face to face, end to end, center to face and center to end dimensions

GB/T 12223 Part-turn valve actuator attachments

GB/T 12227 General purpose industrial valve - Specification of spheroidal graphite iron castings

GB/T 12229 General purpose industrial valves - Specification of carbon steel castings

GB/T 12230 General purpose industrial valve - Specification of stainless steel castings

GB/T 13927-2008 Industrial valves - Pressure testing

GB/T 17213.1 Industrial-process control valves - Part 1: Control valve terminology and general considerations

GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system

GB/T 17241.6 Integral cast iron flanges

GB/T 20878 Stainless and heat-resisting steels - Designation and chemical composition

GB/T 26640 Specification for minimal thickness of the shell of valves

GB/T 30832 Valves - Test method of flow coefficient and flow resistance coefficient

GB/T 32808 Valves - Model designation method

JB/T 106 Valves marking and paint

JB/T 7927-2014 Valve cast steel visual quality requirements

JB/T 7928 Industrial valves - Delivery specification

NB/T 47013.3-2015 Nondestructive testing of pressure equipments - Part 3: Ultrasonic testing

NB/T 47013.4-2015 Nondestructive testing of pressure equipments - Part 4: Magnetic particle testing

NB/T 47013.5-2015 Nondestructive testing of pressure equipments - Part 5: Penetrant testing

NB/T 47014 Welding procedure qualification for pressure equipment

3 Terms and definitions

For the purposes of this standard, the terms and definitions given in GB/T 17213.1 and the following apply.

3.1 plunger flow control valve

valve in which the crank link mechanism drives the plunger to move axially so that the throttling area is changed to fulfill the flow control function

3.2 deviation of rated travel

difference between the actual travel and the rated travel, expressed as a percentage of the rated travel

3.3 inherent flow characteristic

relationship between relative flow coefficient and relative travel, in which the former is the ratio of the flow coefficient for a given travel to the rated flow coefficient while the latter is the ratio of a given travel to the rated travel, where the travel is the distance that the plunger moves from the closed position

4 Structure types, model designation and parameters

4.1 Structure types

Plunger flow control valves (hereinafter referred to as “plunger valves”), by the form of the throttling element, are divided into slotted plunger valve, perforated plunger valve, vaned plunger valve, seat ring plunger valve and composite plunger valve. Typical structures are shown in Figures 1 ~ 4.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Similar standards

How to Download JB/T 14314-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 14314-2022

$385.00