Valid

JB/T 13541-2018Magnetic rotary encoders (English PDF)

磁性旋转编码器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13541-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 4, 2018

Implementation date

May 1, 2019

Scope

JB/T 13541-2018 is the English-translated version of 磁性旋转编码器.

Magnetic rotary encoders are covered by JB/T 13541-2018, a recommended standard of the Chinese machinery industry.

It gives terms and definitions, the structural types and basic parameters, the functions and requirements, the electrical safety performance and the environmental adaptability, and it sets out test methods, inspection rules and provisions on signs and packaging.

The standard applies to magnetic rotary encoders that measure rotary motion using a circular magnetic ring, a gear or a Hall device as the measuring reference. Issued on 4 July 2018 by the Ministry of Industry and Information Technology, it came into force on 1 May 2019.

Found what you need?

Document preview — JB/T 13541-2018

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 13541-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 July 2018 and has been in force since 1 May 2019.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 13541-2018 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

GB/T 10932-2024 — Screw thread micrometer

GB/T 22092-2018 — Micrometer head and depth micrometer with electronic digital display

GB/T 22097-2008 — Gear measuring center

JB/T 13542-2018 — Angle grating encoders - Accuracy inspection specification

JB/T 13540-2018 — Magnetic angle encoders

JB/T 13539-2018 — Exposed grating transducers

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 13541-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 13541-2018

$225.00