JB/T 13540-2018Magnetic angle encoders (English PDF)
磁性角度编码器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13540-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 4, 2018
Implementation date
May 1, 2019
Scope
JB/T 13540-2018 is the English-translated version of 磁性角度编码器.
Magnetic rotary encoders are covered by JB/T 13540-2018, a recommended standard of the Chinese machinery industry.
It gives the terms and definitions, the structural types and basic parameters, the functions, the requirements, the electrical safety performance and the environmental adaptability, and it then sets the test methods, the inspection rules, the signs and the packaging.
The standard applies to magnetic angle encoders that measure angle by means of a circular magnetic ring, a rotating gear or a Hall device, and it groups them into a set of accuracy classes.
Classified J42, it was issued by the Ministry of Industry and Information Technology on 4 July 2018 and took effect on 1 May 2019.
Found what you need?
Document preview — JB/T 13540-2018
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 13540-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 July 2018 and has been in force since 1 May 2019.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 13540-2018 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 10932-2024 — Screw thread micrometer
GB/T 22092-2018 — Micrometer head and depth micrometer with electronic digital display
GB/T 22097-2008 — Gear measuring center
JB/T 13542-2018 — Angle grating encoders - Accuracy inspection specification
JB/T 13541-2018 — Magnetic rotary encoders
JB/T 13539-2018 — Exposed grating transducers
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 13540-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 13540-2018
$225.00