GB/T 38348-2019Multipole magnetic rubber encoders (English PDF)
多极磁性橡胶编码器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38348-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2019
Implementation date
November 1, 2020
Scope
GB/T 38348-2019 is the English-translated version of 多极磁性橡胶编码器.
GB/T 38348-2019 is the Chinese standard "Multipole magnetic rubber encoders". Its scope clause reads: This standard specifies the terms and definitions, classification and marking, structure, and technology of multi-pole magnetic rubber encoders (hereinafter referred to as rubber encoders).
Requirements, test methods, inspection rules, and marking, packaging, transportation, and storage. This standard applies to multi-pole magnetic rubber encoders for automotive brake systems. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38348-2019
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Classification
- G 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 terms and definitions
- 3.1 Magnetic rubber
- 3.2 Magnetic encoder
- 3.3 Multipole magnetic rubber encoder
1 Scope
This standard specifies the terms and definitions, classification and marking, structure, and technology of multi-pole magnetic rubber encoders (hereinafter referred to as rubber encoders).
Requirements, test methods, inspection rules, and marking, packaging, transportation, and storage.
This standard applies to multi-pole magnetic rubber encoders for automotive brake systems.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 528 Determination of tensile stress and strain properties of vulcanized rubber or thermoplastic rubber
GB/T 529 Determination of tear strength of vulcanized rubber or thermoplastic rubber (trousers, right angles and crescents)
GB/T 531.1 Test method for indentation hardness of vulcanized rubber or thermoplastic rubber Part 1. Shore hardness tester (Shore hardness)
GB/T 1690 Test method for liquid resistance of vulcanized rubber or thermoplastic rubber
GB/T 2828.1-2012 Counting sampling inspection procedure Part 1. Batch inspection sampling retrieved by acceptance quality limit (AQL) plan
GB/T 3217 Magnetic test method for permanent magnet (hard magnetic) materials
GB/T 3280 stainless steel cold rolled steel plate and strip
GB/T 3512 Vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat resistance test
GB/T 3672.1-2002 Tolerances for rubber products-Part 1. Tolerances on dimensions
GB/T 5213 Cold rolled low carbon steel plate and steel strip
GB/T 7762 Vulcanized rubber or thermoplastic rubber resistance to ozone cracking static tensile test
GB/T 10125-2012 artificial atmosphere corrosion test salt spray test
GB/T 13237 Cold-rolled steel plate and strip of high-quality carbon structural steel
GB/T 24270 Measuring method for temperature coefficient of magnetic properties of permanent magnetic materials
GB/T 29611 Determination of glass transition temperature of raw rubber by differential scanning calorimetry (DSC)
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Magnetic rubber
Magnetic rubber material.
3.2 Magnetic encoder
Encoder with Hall effect.
3.3 Multipole magnetic rubber encoder
Magnetic encoder with multiple magnetic poles using magnetic rubber as a permanent magnet.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38348-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38348-2019
$235.00