JB/T 13490-2018Angular position sensor for tractor (English PDF)
拖拉机用角度传感器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13490-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2018
Implementation date
December 1, 2018
Scope
JB/T 13490-2018 is the English-translated version of 拖拉机用角度传感器.
Angular position sensors for tractors are the subject of JB/T 13490-2018, a recommended standard of the Chinese machinery industry. For these angle sensors the standard states the requirements, the test methods and the inspection rules, together with the provisions for marking, packaging, transportation and storage.
It carries the Chinese standard classification J68 and the international classification 65.060.10. Its normative references are GB/T 21398-2008, GB/T 28046.2-2011, GB/T 28046.3-2011, GB/T 28046.4-2011 and GB/T 30038-2013.
Found what you need?
Document preview — JB/T 13490-2018
National Standard of the People's Republic of China
- ICS
- 65.060.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 13490-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2018 and has been in force since 1 December 2018.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Angular position sensors for tractors are the subject of JB/T 13490-2018, a recommended standard of the Chinese machinery industry. For these angle sensors the standard states the requirements, the test methods and the inspection rules, together with the provisions for marking, packaging, transportation and storage. It carries the Chinese standard classification J68 and the international classification 65.060.10. Its normative references are GB/T 21398-2008, GB/T 28046.2-2011, GB/T 28046.3-2011, GB/T 28046.4-2011 and GB/T 30038-2013.
JB/T 13490-2018 falls under ICS 65.060.10, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 21398-2008 — Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria
GB/T 28046.2-2011 — Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
GB/T 28046.3-2011 — Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
GB/T 28046.4-2011 — Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads
GB/T 30038-2013 — Road vehicles -- Degrees of electrical equipment protection (IP-Code)
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 13910.2-2020 — Stacking machines - Part 2: Technical requirements
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
GB/T 8118-2010 — The general specification for arc welding machines
6 Classification and status
International classification (ICS): 65.060.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 21398-2008Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria
- GB/T 28046.2-2011Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads
- GB/T 28046.3-2011Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
- GB/T 28046.4-2011Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads
- GB/T 30038-2013Road vehicles - Degrees of electrical equipment protection (IP code)
How to Download JB/T 13490-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 21398-2008 — Agricultural and forestry machinery -- Electromagnetic compatibility -- Test methods and acceptance criteria
GB/T 28046.2-2011 — Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
GB/T 28046.3-2011 — Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
JB/T 13490-2018
$210.00