JB/T 13297-2017TYE4 series three-phase permanent magnet synchronous motors - Technical specifications (frame size 80 to 355) (English PDF)
TYE4系列三相永磁同步电动机技术条件(机座号80~355)
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13297-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
JB/T 13297-2017 is the English-translated version of TYE4系列三相永磁同步电动机技术条件(机座号80~355).
JB/T 13297-2017 is a recommended Chinese machinery industry standard giving the technical specifications for the TYE4 series of three-phase permanent magnet synchronous motors in frame sizes 80 to 355.
It sets the types within the series, the basic parameters and dimensions, the technical requirements, the inspection rules, and the marking, packaging and warranty provisions that go with them.
It is classified K21 and 29.160.30. The standard rests on the general national standards for rotating electrical machines that it quotes, including GB/T 755-2008, GB/T 1971-2006, GB/T 4942.1-2006 and GB/T 22669-2008. Issued on 7 November 2017, it has applied since 1 April 2018.
Found what you need?
Document preview — JB/T 13297-2017
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 13297-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 20 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the technical specifications for the TYE4 series of three-phase permanent magnet synchronous motors in frame sizes 80 to 355. It sets the types within the series, the basic parameters and dimensions, the technical requirements, the inspection rules, and the marking, packaging and warranty provisions that go with them. It is classified K21 and 29.160.30. The standard rests on the general national standards for rotating electrical machines that it quotes, including GB/T 755-2008, GB/T 1971-2006, GB/T 4942.1-2006 and GB/T 22669-2008.
JB/T 13297-2017 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 755-2008 — Rotating electrical machines - Rating and performance
GB/T 997-2008 — Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)
GB/T 1971-2006 — Rotating electrical machines - Terminal markings and direction of rotation
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 4772.1-1999 — Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 10068-2008 — Mechanical vibration of electrical machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2008 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB/T 14711-2013 — General safety requirements for small and medium rotating electrical machines
GB/T 22669-2008 — Test procedures for three-phase permanent magnet synchronous machines
GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 20 pages
5 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 755-2008Rotating electrical machines - Rating and performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1971-2006Rotating electrical machines - Terminal markings and direction of rotation
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 4772.1-1999Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
Similar standards
How to Download JB/T 13297-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10068-2008 — Mechanical vibration of electrical machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2008 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 13297-2017
$355.00