GB/T 22711-2019Specification for three-phase permanent magnet synchronous motors(frame size 80~355) (English PDF)
三相永磁同步电动机技术条件（机座号 80～355）
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 22711-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 22711-2019 is the English-translated version of 三相永磁同步电动机技术条件（机座号 80～355）.
GB/T 22711-2019 is the Chinese standard "Specification for three-phase permanent magnet synchronous motors(frame size 80~355)". Its scope clause reads: This standard specifies the type, basic parameters and dimensions, technical requirements, test methods, inspection rules, signs, and three-phase permanent magnet synchronous motors.
Packaging and warranty requirements. This standard applies to the asynchronous start three-phase permanent magnet synchronous motor with rotor-cage starter winding (frame size 80~355) (hereinafter referred to as electric motor).
All series of motors derived from this series of motors can also be referred to. Its clauses include type, basic parameters and dimensions.
Found what you need?
Document preview — GB/T 22711-2019
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Classification
- K 21
- Replacing
- GB/T 22711-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 type, basic parameters and dimensions
- 4 Technical requirements
- 5 Test method
- 6 Inspection rules
- 7 Marking, packaging and warranty period
1 Scope
This standard specifies the type, basic parameters and dimensions, technical requirements, test methods, inspection rules, signs, and three-phase permanent magnet synchronous motors.
Packaging and warranty requirements.
This standard applies to the asynchronous start three-phase permanent magnet synchronous motor with rotor-cage starter winding (frame size 80~355) (hereinafter referred to as electric motor). All series of motors derived from this series of motors can also be referred to.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191-2008 packaging storage and transportation icon
GB/T 755 rotary motor rating and performance
GB/T 997-2008 Classification of rotary electric machine structure type, installation type and junction box position (IM code)
GB/T 1971-2006 Rotary motor line end mark and direction of rotation
GB/T 1993-1993 Rotating motor cooling method
GB/T 4772.1-1999 Rotating electrical machines - Dimensions and output power levels - Part 1. Part No. 56~400 and flange number 55~
GB/T 4831-2016 Rotating motor product model preparation method
GB/T 4942.1-2006 The degree of protection (IP code) of the overall structure of a rotating electrical machine
Rotating electrical machines - Determination of noise and noise - Part 1
GB/T 12665-2017 Damp heat test requirements for motors used under normal environmental conditions
GB/T 14711-2013 General safety requirements for small and medium-sized rotating electrical machines
GB/T 22669-2008 Test method for three-phase permanent magnet synchronous motor
GB/T 22719.1-2008 AC low-voltage motors - fused windings - Part 1 . Test method
GB/T 22719.2-2008 AC low-voltage motors - fused windings - Part 2
IEC 60034-14.2018 Rotating electrical machines - Part 14. Mechanical vibrations of motors with shaft heights up to 56 mm
Measurement, evaluation and limits (Rotatingelectricalmachines-Part 14. Mechanicalvibrationofcertainmachines
Withshaftheights56mmandhigher-Measurement,evaluationandlimitsofvibrationseverity)
3 type, basic parameters and dimensions
3.1
The motor model consists of two parts. product code and specification code (performed in accordance with GB/T 4831-2016).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 755Rotating electrical machines - Rating and performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1971-2006Rotating electrical machines - Terminal markings and direction of rotation
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 4772.1-1999Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
GB/T 4942.1-2006 · IEC 60034-14:2018
Similar standards
Editions of GB/T 22711
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 22711-2019 | Specification for three-phase permanent magnet synchronous motors(frame size 80~355) | current edition | Current |
| GB/T 22711-2008 | Specification for three-phase permanent magnet synchronous motors(frame size 80~355) | previous edition | Superseded |
This page sells the current edition, GB/T 22711-2019. Earlier editions are listed for reference only.
How to Download GB/T 22711-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2017 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB/T 1993-1993 — Cooling methods for rotating electrical machines
Secure payment via Stripe
Payments accepted
GB/T 22711-2019
$315.00