JB/T 12516-2015Modern manufacturing service - Equipment manufacturing industry - Terminology (English PDF)
现代制造服务业 装备制造业 术语
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12516-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
JB/T 12516-2015 is the English-translated version of 现代制造服务业 装备制造业 术语.
JB/T 12516-2015 is the Chinese machinery industry standard covering modern manufacturing service - Equipment manufacturing industry - Terminology. It was issued on 14 July 2015 and has been in force since 1 January 2016, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 12516-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12516-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 12516-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 13319-2020 — Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
GB/T 12716-2011 — Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
JB/T 6063-2006 — Non-destructive testing - Materials for magnetic particle testing
JB/T 15293-2025 — Technical product documentation - Technical specifications of three-dimensional modeling for NC machine tools
JB/T 11731-2025 — Non-destructive Testing - General Technical Specification for Ultrasonic Array Probes
JB/T 11130-2025 — Industrial Endoscopes
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 12516-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 12516-2015
$399.00