JB/T 12424-2015Standard practice for defining and classifying visual defects in products (SMC/BMC) molded from thermosetting plastics for electrical purposes (English PDF)
电气用热固性模塑制品可视缺陷定义及分类(SMC/BMC)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12424-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12424-2015 is the English-translated version of 电气用热固性模塑制品可视缺陷定义及分类(SMC/BMC).
JB/T 12424-2015 is the Chinese machinery industry standard that defines and classifies the visual defects of moulded products made from thermosetting plastics for electrical purposes, the SMC and BMC compounds.
It gives the definition of each defect and the class into which it falls, so that the appearance of a moulding can be judged in agreed terms. Its field of application is reinforced thermosetting moulded products made by compression moulding, transfer moulding and injection moulding.
The standard is a recommended one and sits under the Chinese classification K15 and the international classification 29.035.20. It quotes GB/T 2035-2008, ASTM D2562-2002 and ASTM D2563-2002.
Found what you need?
Document preview — JB/T 12424-2015
National Standard of the People's Republic of China
- ICS
- 29.035.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12424-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard that defines and classifies the visual defects of moulded products made from thermosetting plastics for electrical purposes, the SMC and BMC compounds. It gives the definition of each defect and the class into which it falls, so that the appearance of a moulding can be judged in agreed terms. Its field of application is reinforced thermosetting moulded products made by compression moulding, transfer moulding and injection moulding. The standard is a recommended one and sits under the Chinese classification K15 and the international classification 29.035.20. It quotes GB/T 2035-2008, ASTM D2562-2002 and ASTM D2563-2002.
JB/T 12424-2015 falls under ICS 29.035.20, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2035-2008 — Terms and definitions for plastics
ASTM D2562-2002
ASTM D2563-2002
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
GB/T 11026.1-2016 — Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
GB/T 10581-2006 — Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
JB/T 12421-2015 — Test method for endurance of insulating materials for inverter-fed motors under repetitive impulse electrical stress
JB/T 12420-2015 — Polyetheretherketone moulding compounds for electrical purposes
JB/T 12419-2015 — Polyphenylene sulfide moulding compounds for electrical purposes
6 Classification and status
International classification (ICS): 29.035.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 12424-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2035-2008 — Terms and definitions for plastics
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 12424-2015
$329.00