Valid

JB/T 12262-2015Double flyer armature winding and inserting machines for small motors (English PDF)

微电机电枢双飞叉绕嵌机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12262-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12262-2015 is the English-translated version of 微电机电枢双飞叉绕嵌机.

JB/T 12262-2015 is a recommended standard of the Chinese machinery industry covering double flyer winding and inserting machines for small motor armatures.

It sets out the terms and definitions, the model designations, the technical requirements, the test methods and the inspection rules for the machine, and adds the provisions for marking, packaging, transport and storage as well as for installation, use and maintenance.

Its field of application is machines that wind micro-motor armatures, or rotors, with a shaft diameter from 3 mm to 20 mm and a rotor diameter from 20 mm to 100 mm, and machines that wind the stators of outer-rotor induction and brushless micro-motors. Among the standards it quotes are GB/T 8196, GB/T 13384 and GB/T 16769.

Found what you need?

Document preview — JB/T 12262-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 12262-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry covering double flyer winding and inserting machines for small motor armatures. It sets out the terms and definitions, the model designations, the technical requirements, the test methods and the inspection rules for the machine, and adds the provisions for marking, packaging, transport and storage as well as for installation, use and maintenance. Its field of application is machines that wind micro-motor armatures, or rotors, with a shaft diameter from 3 mm to 20 mm and a rotor diameter from 20 mm to 100 mm, and machines that wind the stators of outer-rotor induction and brushless micro-motors. Among the standards it quotes are GB/T 8196, GB/T 13384 and GB/T 16769.

JB/T 12262-2015 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB/T 191

GB/T 13306

GB/T 2900.39

GB/T 8196

GB/T 13384

GB/T 16769

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 27743-2025 — Inspection method for transformer of special equipment

GB/T 43962.1-2024 — System integration of power battery digital workshop - Part 1: General requirements

GB/T 38331-2019 — General technical requirements for Li-ion battery made machine

JB/T 12261-2015 — Wave winding machines for motor stators

6 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 12262-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12262-2015

$145.00