JB/T 12255-2015Sintered valve plates, connecting rods and pistons for refrigeration compressors - Technical specifications (English PDF)
制冷压缩机烧结阀板、连杆和活塞技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12255-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12255-2015 is the English-translated version of 制冷压缩机烧结阀板、连杆和活塞技术条件.
JB/T 12255-2015 covers the sintered valve plates, connecting rods and pistons of refrigeration compressors. The standard gives the product classification, the technical requirements, the test methods and the inspection rules, and it adds the provisions on packaging, marking, transport and storage.
The parts within its field of application are the sintered iron-based powder metallurgy valve plates, connecting rods and pistons used in refrigeration compressors.
Among the standards it quotes are GB/T 1184-1996, GB/T 1800.1-2009, GB/T 1957-2006, GB/T 5163-2006, GB/T 10423-2002, JB/T 7905-2013 and the parts of JB/T 8063. It is filed under Chinese classification H72.
Found what you need?
Document preview — JB/T 12255-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12255-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 12255-2015 covers the sintered valve plates, connecting rods and pistons of refrigeration compressors. The standard gives the product classification, the technical requirements, the test methods and the inspection rules, and it adds the provisions on packaging, marking, transport and storage. The parts within its field of application are the sintered iron-based powder metallurgy valve plates, connecting rods and pistons used in refrigeration compressors. Among the standards it quotes are GB/T 1184-1996, GB/T 1800.1-2009, GB/T 1957-2006, GB/T 5163-2006, GB/T 10423-2002, JB/T 7905-2013 and the parts of JB/T 8063. It is filed under Chinese classification H72.
JB/T 12255-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.1-2009 — Geometrical product specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 1957-2006 — Tolerances and general features for plain limit gauges
GB/T 5163-2006 — Sintered metal materials, excluding hard metals -- Permeable sintered metal materials -- Determination of density, oil content, and open porosity
GB/T 9097-2016 — Sintered metal materials, excluding hard metals -- Determination of apparent hardness and microhardness
GB/T 10423-2002 — Sintered metal friction materials - Determination of tensile strength
GB/T 13319-2003 — Geometrical product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
JB/T 2798-1999 — Iron-based powder metallurgy sintered products - Metallographic standard
JB/T 7905-2013 — Sintered Metal Materials, Excluding Hardmetals - Sampling
JB/T 8063.1-2011 — Methods for chemical analysis of powder metallurgy materials and products - Part 1: The gas volumetric method for the determination of carbon in iron-based materials and products
JB/T 8063.2-2011 — Methods for chemical analysis of powder metallurgy materials and products - Part 2: Ammonium hydrogen fluoride masking iodometric method for the determination of copper in iron-based materials and products
JB/T 8063.3-2011 — Methods for chemical analysis of powder metallurgy materials and products - Part 3: The thiocyanate photometric method for the determination of molybdenum in iron-based materials and products
JB/T 8063.4-2011 — Methods for chemical analysis of powder metallurgy materials and products - Part 4: Potassium iodide-sodium thiosulfate titrimetric method for the determination of copper in copper-based materials and products
JB/T 8063.5-2011 — Methods for chemical analysis of powder metallurgy materials and products - Part 5: Sodium hypophosphite reduction - Potassium iodate titrimetric method for the determination of tin in copper-based materials and products
JB/T 8063.6-2011 — Methods for chemical analysis of powder metallurgy materials and products - Part 6: Electrolytic separation - EDTA titrimetric method for the determination of lead in copper-based materials and products
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 10766-2022 — Copper-based dry friction discs for clutches of forging machine tools - Technical specifications
GB/T 11101-2020 — Cemented carbide blanks for round rods
GB/T 14199-2010 — Electroacoustics - General specification for hearing aid
JB/T 12256-2015 — Specification for sintered stainless steel flame arrester elements for explosive gas atmospheres
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.1-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 1957-2006Tolerances and general features for plain limit gauges
- GB/T 5163-2006Sintered metal materials, excluding hard metals -- Permeable sintered metal materials -- Determination of density, oil content, and open porosity
- GB/T 9097-2016Sintered metal materials, excluding hard metals -- Determination of apparent hardness and microhardness
Similar standards
How to Download JB/T 12255-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10423-2002 — Sintered metal friction materials - Determination of tensile strength
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13319-2003 — Geometrical product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
JB/T 12255-2015
$145.00