JB/T 12008-2014Commutator precision turning machines for micromotors (English PDF)
微电机换向器精车机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12008-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12008-2014 is the English-translated version of 微电机换向器精车机.
The recommended standard JB/T 12008-2014 covers precision turning machines for micromotor commutators. It sets the machine models, the technical requirements, the test methods and the inspection rules.
The machines within its scope hold the commutator on a cylindrical shaft supported at both ends in V or U shaped rests and drive it by belt friction. Its Chinese classification is K97 and its international classification 29.020.
It quotes GB/T 191, GB/T 2900.39, GB/T 13306, GB/T 13384 and GB/T 16769. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 12008-2014
National Standard of the People's Republic of China
- ICS
- 29.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12008-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The recommended standard JB/T 12008-2014 covers precision turning machines for micromotor commutators. It sets the machine models, the technical requirements, the test methods and the inspection rules. The machines within its scope hold the commutator on a cylindrical shaft supported at both ends in V or U shaped rests and drive it by belt friction. Its Chinese classification is K97 and its international classification 29.020. It quotes GB/T 191, GB/T 2900.39, GB/T 13306, GB/T 13384 and GB/T 16769.
JB/T 12008-2014 falls under ICS 29.020, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 13306
GB/T 2900.39
GB/T 13384
GB/T 16769
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 27743-2025 — Inspection method for transformer of special equipment
GB/T 43962.1-2024 — System integration of power battery digital workshop - Part 1: General requirements
GB/T 38331-2019 — General technical requirements for Li-ion battery made machine
JB/T 12011-2014 — Vacuum drying and oil filling equipment for high-voltage instrument transformers
JB/T 12010-2014 — Vacuum oil filling equipment for amorphous alloy core transformers
JB/T 12009-2014 — Commutator undercutting machines for micromotors
6 Classification and status
International classification (ICS): 29.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 13306Plates
- GB/T 2900.39Electrotechnical terminology - Special equipment for electrical machine and transformer
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 16769Metal-cutting machine tools -- Measurement method of sound pressure level
Similar standards
How to Download JB/T 12008-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 12008-2014
$105.00