JB/T 11993-2014Slewing reducers (English PDF)
回转式减速机
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11993-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11993-2014 is the English-translated version of 回转式减速机.
JB/T 11993-2014 is a recommended Chinese machinery industry standard for slewing reducers, the geared units that turn the rotating part of a machine. It defines the terms used for them, fixes their types and basic parameters, and then sets requirements, test methods and inspection rules along with marking, packaging, transportation and storage.
Its field of application is slewing reducers themselves, without restriction to one machine type. The references it quotes include GB/T 1348-2009, GB/T 7323-2008, GB/T 13306-2011, GB/T 13384-2008, GB/T 22523-2008, JB/T 2300-2011 and JB/T 5558-1991.
Chinese classification J19 and international classification 21.120 apply. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 11993-2014
National Standard of the People's Republic of China
- ICS
- 21.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Technical Requirements
- 4.1 Pallet
- 4.2 Pallet Package
- 5 Measurement and Evaluation Method
- 5.1 Paper Box and Calp Box
- 5.2 Wooden Box
- 6.1 Materials
- 6.2 Dimension and Tolerance
- 6.3 Box Making
- 6.4 Packing
- 6.5 Marks
- 7 Test Method
- 7.1 Material Test
- 7.2 Measurement of Dimensional Tolerance
- 7.3 Appearance Inspection
- 7.4 Property Test
- 8 Inspection rules
- 9 Marking, packaging, transportation and storage
1 Foreword
JB/T 11993-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 23 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for slewing reducers, the geared units that turn the rotating part of a machine. It defines the terms used for them, fixes their types and basic parameters, and then sets requirements, test methods and inspection rules along with marking, packaging, transportation and storage. Its field of application is slewing reducers themselves, without restriction to one machine type. The references it quotes include GB/T 1348-2009, GB/T 7323-2008, GB/T 13306-2011, GB/T 13384-2008, GB/T 22523-2008, JB/T 2300-2011 and JB/T 5558-1991. Chinese classification J19 and international classification 21.120 apply.
JB/T 11993-2014 falls under ICS 21.120, in the field of mechanical systems and components.
This catalogue holds 260 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1348-2009 — Spheroidal graphite iron castings
GB/T 7323-2008 — Extreme pressure lithium lubricating grease
GB/T 13306-2011 — Plates
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 22523-2008 — Feeler gauge
JB/T 2300-2011 — Slewing bearings
JB/T 5558-1991 — Worm gear reducers - Load test methods
JB/T 5944-1991 — Construction machinery - General technical specifications for heat-treated parts
JB/T 5946-1991 — Construction machinery - General technical specifications for painting
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 23 pages
5 Related standards
Standards on related subjects:
JB/T 9050.2-2024 — General technical requirement - Part 2: The determination method for contact spot
GB/T 5015-2017 — Gear coupling with elastomer
GB/T 14118-1993 — Harmonic drive reducers
JB/T 15457-2026 — Minitype precision planetary reducer
JB/T 15456-2026 — Test methods for precision reducers
JB/T 11587-2025 — Large tooth-type electromagnetic clutch
6 Classification and status
International classification (ICS): 21.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
How to Download JB/T 11993-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 11993-2014
$405.00