JB/T 11872-2014Specifications for Small Brushless DC Motor with Gearhead (English PDF)
小型齿轮减速无刷直流电动机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11872-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11872-2014 is the English-translated version of 小型齿轮减速无刷直流电动机技术条件.
JB/T 11872-2014 is a recommended Chinese machinery industry standard that lays down the specifications for small brushless direct current motors fitted with a gearhead.
It gives the technical requirements and the test methods, the inspection rules, the test conditions and what has to be prepared for delivery. It applies to small brushless DC motors whose gear reducer is square or round in shape.
The standard is filed under the Chinese classification K24 and the international classification 29.160.30, and was issued by the Ministry of Industry and Information Technology.
Among the standards it quotes are GB 755-2008, GB/T 1993-1993, GB/T 2423.1, GB/T 2828.1-2012, GB/T 7345-2008, GB/T 10069.1-2006, GB/T 11281-2009, GB 12350-2009 and GB/T 21418-2008.
Found what you need?
Document preview — JB/T 11872-2014
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11872-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that lays down the specifications for small brushless direct current motors fitted with a gearhead. It gives the technical requirements and the test methods, the inspection rules, the test conditions and what has to be prepared for delivery. It applies to small brushless DC motors whose gear reducer is square or round in shape. The standard is filed under the Chinese classification K24 and the international classification 29.160.30, and was issued by the Ministry of Industry and Information Technology. Among the standards it quotes are GB 755-2008, GB/T 1993-1993, GB/T 2423.1, GB/T 2828.1-2012, GB/T 7345-2008, GB/T 10069.1-2006, GB/T 11281-2009, GB 12350-2009 and GB/T 21418-2008.
JB/T 11872-2014 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.1
GB/T 2423.2
GB/T 2423.3
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 11281-2009 — General specification for reduction gearhead of electrical micro-machine
GB 12350-2009 — Safety requirements of small-power motors
GB/T 21418-2008 — General specification for permanent magnet brushless motor system
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 39553-2020 — General specification for DC servo motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 15025-2025 — AC motors for electric actuators
JB/T 15024-2025 — Brushless DC motor for electric compact shelving
JB/T 11703-2025 — Technical specifications for brushless DC motors for air conditioner fans
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 2423.1Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
Similar standards
How to Download JB/T 11872-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12350-2009 — Safety requirements of small-power motors
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
JB/T 11872-2014
$265.00