Valid

JB/T 11685-2013Vertical hammer ultrafine grinder (English PDF)

立轴锤式饲料超微粉碎机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11685-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11685-2013 is the English-translated version of 立轴锤式饲料超微粉碎机.

JB/T 11685-2013 is a recommended standard of the Chinese machinery industry for the vertical-shaft hammer ultrafine grinder used on feed. It fixes the terms and definitions for the machine, its model designation, the requirements it must meet, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.

The standard carries the Chinese classification B93 and the international classification 65.060. Among the standards it quotes are GB 2893, GB 2894, GB/T 3098.1-2010, GB 5226.1, GB/T 5917.1, GB/T 6435, GB/T 9286-1998, GB/T 18695 and GB 23821.

Found what you need?

Document preview — JB/T 11685-2013

National Standard of the People's Republic of China

ICS
65.060

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11685-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for the vertical-shaft hammer ultrafine grinder used on feed. It fixes the terms and definitions for the machine, its model designation, the requirements it must meet, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. The standard carries the Chinese classification B93 and the international classification 65.060. Among the standards it quotes are GB 2893, GB 2894, GB/T 3098.1-2010, GB 5226.1, GB/T 5917.1, GB/T 6435, GB/T 9286-1998, GB/T 18695 and GB 23821.

JB/T 11685-2013 falls under ICS 65.060, in the field of agriculture.

This catalogue holds 368 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB 2893

GB 2894

GB/T 3098.1-2010 — Mechanical properties of fasteners - Bolts, screws and studs

GB/T 3768

GB 5226.1

GB/T 5917.1

GB/T 6435

GB/T 6971-2007 — Test method for feed mills

GB/T 9239.1

GB/T 9286-1998 — Paints and varnishes--Cross cut test for films

GB/T 10647

GB/T 18695

GB 23821

GB/T 25698

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 24674-2021 — Waste submersible motor-pumps

GB/T 12785-2014 — Test methods for submersible motor-pumps

JB/T 10600-2006 — Vertical self-priming pumps

JB/T 11686-2013 — Twin-screw extruder for aquafeed

JB/T 11684-2013 — Fine-grinding feed hammer mill

JB/T 11683-2013 — Hammer mill for industry feed

6 Classification and status

International classification (ICS): 65.060

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11685-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11685-2013

$269.00