JB/T 6270-2013Specification for Feed Hammer Grinder (English PDF)
齿爪式饲料粉碎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6270-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 6270-2013 is the English-translated version of 齿爪式饲料粉碎机.
JB/T 6270-2013 is a recommended Chinese machinery industry standard that specifies claw-tooth feed grinding mills. For this machine it fixes the model designation, the technical requirements, the safety requirements and the inspection rules, and it also sets marking, packaging and storage.
The scope names the claw-tooth feed mill itself as the equipment covered, referred to in the text simply as the mill. Quoted standards include GB/T 699, GB/T 2828.1-2003, GB/T 3098.1, GB/T 3098.2, GB/T 6971-2007, GB/T 9480, GB 10396, GB 23821-2009 and JB/T 9832.2-1999.
It supersedes JB/T 6270-1992. The standard sits under Chinese classification B93 and international classification 65.060.99, and the Ministry of Industry and Information Technology issued it.
Found what you need?
Document preview — JB/T 6270-2013
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 6270-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6270-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 6270-1992.
2 Scope
This standard is a recommended Chinese machinery industry standard that specifies claw-tooth feed grinding mills. For this machine it fixes the model designation, the technical requirements, the safety requirements and the inspection rules, and it also sets marking, packaging and storage. The scope names the claw-tooth feed mill itself as the equipment covered, referred to in the text simply as the mill. Quoted standards include GB/T 699, GB/T 2828.1-2003, GB/T 3098.1, GB/T 3098.2, GB/T 6971-2007, GB/T 9480, GB 10396, GB 23821-2009 and JB/T 9832.2-1999. It supersedes JB/T 6270-1992. The standard sits under Chinese classification B93 and international classification 65.060.99, and the Ministry of Industry and Information Technology issued it.
3 Normative references
JB/T 6270-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 699
GB/T 2828.1-2003
GB/T 3098.1
GB/T 3098.2
GB/T 6971-2007 — Test method for feed mills
GB/T 9239.1
GB/T 9480
GB 10396
GB/T 12620
GB/T 13306
GB 23821-2009
JB/T 9832.2-1999 — Agricultural and forestry tractors and machinery - Paint coatings - Cross-cut adhesion test
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6270-1992 (earlier edition)
6 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699Quality carbon structure steels
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3098.1Mechanical properties of fasteners - Bolts, screws and studs
- GB/T 3098.2Mechanical properties of fasteners - Part 2: Nuts
- GB/T 6971-2007Test method for feed mills
- GB/T 9239.1Mechanical vibration—Rotor balancing—Part 1:Introduction
GB 23821-2009
Editions of JB/T 6270
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6270-2013 | Specification for Feed Hammer Grinder | current edition | Current |
| JB/T 6270-1992 | Specification for Feed Hammer Grinder | previous edition | Superseded |
This page sells the current edition, JB/T 6270-2013. Earlier editions are listed for reference only.
How to Download JB/T 6270-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 10396-2006 — Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
GB/T 12620-2008 — Round and elongated apertures with round and square plate screens
GB/T 13306-2011 — Plates
Secure payment via Stripe
Payments accepted
JB/T 6270-2013
$105.00