Valid

JB/T 11480-2013Eddy Current Dynamometers (English PDF)

电涡流测功器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11480-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11480-2013 is the English-translated version of 电涡流测功器.

JB/T 11480-2013 is the recommended Chinese machinery industry standard for eddy current dynamometers, the machine being called throughout simply the dynamometer.

What it specifies is the technical requirements for that dynamometer, the test methods and the inspection rules, and eddy current dynamometers are what it applies to.

The standard carries the Chinese classification J91 and the international classification 27.020. Among the standards it quotes are GB/T 191, GB/T 2828.1, GB/T 4025, GB/T 4026, GB 4208-2008, GB/T 4942.1, GB/T 6388, GB 7947, GB/T 9239.1, GB/T 13306, GB/T 21404-2008, JB/T 9329, JB/T 9870-2013 and JJG 653. It was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 11480-2013

National Standard of the People's Republic of China

ICS
27.020

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11480-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese machinery industry standard for eddy current dynamometers, the machine being called throughout simply the dynamometer. What it specifies is the technical requirements for that dynamometer, the test methods and the inspection rules, and eddy current dynamometers are what it applies to. The standard carries the Chinese classification J91 and the international classification 27.020. Among the standards it quotes are GB/T 191, GB/T 2828.1, GB/T 4025, GB/T 4026, GB 4208-2008, GB/T 4942.1, GB/T 6388, GB 7947, GB/T 9239.1, GB/T 13306, GB/T 21404-2008, JB/T 9329, JB/T 9870-2013 and JJG 653.

JB/T 11480-2013 falls under ICS 27.020, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 2828.1

GB/T 4025

GB/T 4026

GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)

GB/T 4942.1

GB/T 6388

GB 7947

GB/T 9239.1

GB/T 13306

GB/T 21404-2008 — Internal combustion engine - Determination and method for the measurement of engine power - General requirements

JB/T 9329

JB/T 9870-2013 — Hydraulic dynamometers

JJG 653

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test

GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise

JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors

JB/T 11014-2025 — General gasoline engine sealing performance - Technical requirements and test methods

JB/T 11482-2013 — Diesel engines for speedboats - Specifications

JB/T 11481-2013 — Electric Dynamometers

6 Classification and status

International classification (ICS): 27.020

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11480-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11480-2013

$240.00