JB/T 11358-2013Specification for small geared AC motors (English PDF)
小型齿轮减速交流电动机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11358-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11358-2013 is the English-translated version of 小型齿轮减速交流电动机技术条件.
The recommended machinery industry standard JB/T 11358-2013 deals with small alternating current motors fitted with a gearhead. It classifies these geared AC motors and lays down their technical requirements and test methods, together with inspection rules and requirements for preparation for delivery and for the information supplied to users.
Its field of application is the small AC motor reduced by a cylindrical gear unit. The document carries the Chinese classification K24 and the international classification 29.160.30.
Among the standards it quotes are GB 755-2008, GB/T 2423.1-2008, GB/T 4942.1-2006, GB/T 7345-2008, GB/T 11281-2009 and JB/T 10490-2004.
Found what you need?
Document preview — JB/T 11358-2013
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11358-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The recommended machinery industry standard JB/T 11358-2013 deals with small alternating current motors fitted with a gearhead. It classifies these geared AC motors and lays down their technical requirements and test methods, together with inspection rules and requirements for preparation for delivery and for the information supplied to users. Its field of application is the small AC motor reduced by a cylindrical gear unit. The document carries the Chinese classification K24 and the international classification 29.160.30. Among the standards it quotes are GB 755-2008, GB/T 2423.1-2008, GB/T 4942.1-2006, GB/T 7345-2008, GB/T 11281-2009 and JB/T 10490-2004.
JB/T 11358-2013 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
GB/T 10069.1
GB/T 11281-2009 — General specification for reduction gearhead of electrical micro-machine
GB 12350-2009 — Safety requirements of small-power motors
JB/T 7614-1994 — AC torque motors - General technical specifications
JB/T 10490-2004 — Mechanical vibration of small-power motors - Measurement, evaluation and limits
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 39553-2020 — General specification for DC servo motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 11357-2013 — Specification for small geared permanent magnet DC motors
JB/T 11356-2013 — General technical requirements for small geared motors
JB/T 11355-2013 — General technical requirements for permanent magnet DC motors for massage chairs
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 4942.1-2006Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Similar standards
How to Download JB/T 11358-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12350-2009 — Safety requirements of small-power motors
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 10069.1-1988 — Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise
JB/T 11358-2013
$225.00