Valid

JB/T 11356-2013General technical requirements for small geared motors (English PDF)

小型齿轮减速电动机通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11356-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 11356-2013 is the English-translated version of 小型齿轮减速电动机通用技术条件.

JB/T 11356-2013 is the recommended Chinese machinery industry standard that states general technical requirements for small motors reduced by a cylindrical gear unit.

It arranges the products in classes and then sets out technical requirements, test methods, inspection rules and the preparation of the product for delivery. Its field of application is defined by the continuous rated output power of the motor referred to 1500 r/min.

The document is filed under Chinese classification K24 and international classification 29.160.30. Among the standards it quotes are GB 755-2008, GB/T 2828.1-2003, GB/T 7345-2008, GB/T 21418-2008, GB/T 22719.1 and JB/T 10490-2004.

Found what you need?

Document preview — JB/T 11356-2013

National Standard of the People's Republic of China

ICS
29.160.30

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11356-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese machinery industry standard that states general technical requirements for small motors reduced by a cylindrical gear unit. It arranges the products in classes and then sets out technical requirements, test methods, inspection rules and the preparation of the product for delivery. Its field of application is defined by the continuous rated output power of the motor referred to 1500 r/min. The document is filed under Chinese classification K24 and international classification 29.160.30. Among the standards it quotes are GB 755-2008, GB/T 2828.1-2003, GB/T 7345-2008, GB/T 21418-2008, GB/T 22719.1 and JB/T 10490-2004.

JB/T 11356-2013 falls under ICS 29.160.30, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 755-2008 — Rotating Electrical Machines - Rating and Performance

GB/T 1993-1993 — Cooling methods for rotating electrical machines

GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold

GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat

GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan

GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

GB/T 7345-2008 — General requirements for electrical machine for automatic control system

GB/T 10069.1

GB/T 11281-2009 — General specification for reduction gearhead of electrical micro-machine

GB 12350-2009 — Safety requirements of small-power motors

GB/T 21418-2008 — General specification for permanent magnet brushless motor system

GB/T 22719.1

JB/T 10490-2004 — Mechanical vibration of small-power motors - Measurement, evaluation and limits

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 39553-2020 — General specification for DC servo motors

JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors

GB/T 7345-2008 — General requirements for electrical machine for automatic control system

JB/T 11358-2013 — Specification for small geared AC motors

JB/T 11357-2013 — Specification for small geared permanent magnet DC motors

JB/T 11355-2013 — General technical requirements for permanent magnet DC motors for massage chairs

6 Classification and status

International classification (ICS): 29.160.30

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11356-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11356-2013

$225.00