JB/T 11352-2013General Technical Specifications for Continuous Cold Roll (Bending) Forming Machinery (English PDF)
辊式冷轧（弯）成型机械通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11352-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11352-2013 is the English-translated version of 辊式冷轧（弯）成型机械通用技术条件.
JB/T 11352-2013 is a recommended standard of the Chinese machinery industry that sets the general technical conditions for continuous cold roll forming and roll bending machinery.
It gives the terms and definitions, the classification and the models and specifications of these machines, the requirements they must meet, the test methods, the inspection rules, and the provisions for marking, packaging, transport, storage and the instruction manual.
The document carries the Chinese classification J62 and the international classification 25.120.10. Among the standards it quotes are GB/T 228.1, GB/T 229, GB/T 230.1, GB 2894, GB/T 3766-2001, GB 5226.1-2008, GB/T 6723, GB/T 7935, GB/T 9451, GB/T 9969, GB/T 10923, GB/T 12755, GB/T 23281 and JB/T 4378.2.
Found what you need?
Document preview — JB/T 11352-2013
National Standard of the People's Republic of China
- ICS
- 25.120.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 11352-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
2 Scope
JB/T 11352-2013 is a recommended standard of the Chinese machinery industry that sets the general technical conditions for continuous cold roll forming and roll bending machinery. It gives the terms and definitions, the classification and the models and specifications of these machines, the requirements they must meet, the test methods, the inspection rules, and the provisions for marking, packaging, transport, storage and the instruction manual. The document carries the Chinese classification J62 and the international classification 25.120.10. Among the standards it quotes are GB/T 228.1, GB/T 229, GB/T 230.1, GB 2894, GB/T 3766-2001, GB 5226.1-2008, GB/T 6723, GB/T 7935, GB/T 9451, GB/T 9969, GB/T 10923, GB/T 12755, GB/T 23281 and JB/T 4378.2.
3 Normative references
JB/T 11352-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 228.1
GB/T 229
GB/T 230.1
GB 2894
GB/T 3766-2001
GB 5226.1-2008
GB/T 6723
GB/T 7935
GB/T 9451
GB/T 9969
GB/T 10923
GB/T 12755
GB/T 15519-2002 — Chemical conversion coatings -- Black oxide coating on iron and steel -- Specification and test methods
GB/T 23281
JB/T 4378.2
JB/T 5000.12
JB/T 8609
JB/T 9050.1
QB/T 3822
QB/T 3834
YB/T 5327
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 25.120.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 228.1Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
- GB/T 229Metallic Materials — Charpy Pendulum Impact Test Method
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB 2894Safety colours and safety signs
- GB/T 3766-2001Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 6723Cold forming open section steel for general structure
GB 5226.1-2008 · QB/T 3822 · QB/T 3834 · YB/T 5327
Similar standards
How to Download JB/T 11352-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 2894-2025 — Safety colours and safety signs
GB/T 10923-2009 — Test code of accuracy for metal forming machine
GB/T 12755-2008 — Profiled steel sheet for building
Secure payment via Stripe
Payments accepted
JB/T 11352-2013
$389.00