JB/T 11314-2013Specification for shaded pole motors of household submersible pumps (English PDF)
家用潜水泵用罩极式电动机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11314-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11314-2013 is the English-translated version of 家用潜水泵用罩极式电动机技术条件.
JB/T 11314-2013 is a recommended Chinese machinery industry standard for the shaded pole motor fitted to household submersible pumps. It deals with the oil-filled YJQ series motor used in household drainage submersible pumps, setting out its types, its basic parameters and its dimensions.
The technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage are all given. Among the standards it quotes are GB/T 191-2008, GB 755-2008, GB/T 1993-1993, GB/T 4942.1-2006, GB/T 5171-2002, GB/T 9651-2008, GB/T 10125-1997, GB/T 12137-2002, GB 12350-2009 and GB 14536.3-2008. The classifications recorded are K24 and 29.130.30.
Found what you need?
Document preview — JB/T 11314-2013
National Standard of the People's Republic of China
- ICS
- 29.130.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11314-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the shaded pole motor fitted to household submersible pumps. It deals with the oil-filled YJQ series motor used in household drainage submersible pumps, setting out its types, its basic parameters and its dimensions. The technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage are all given. Among the standards it quotes are GB/T 191-2008, GB 755-2008, GB/T 1993-1993, GB/T 4942.1-2006, GB/T 5171-2002, GB/T 9651-2008, GB/T 10125-1997, GB/T 12137-2002, GB 12350-2009 and GB 14536.3-2008. The classifications recorded are K24 and 29.130.30.
JB/T 11314-2013 falls under ICS 29.130.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB 2828.1-2012
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 5171-2002 — General technical conditions of small power motors
GB/T 9651-2008 — Test procedures for single-phase induction motor
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 10125-1997 — Corrosion tests in artificial atmospheres--Salt spray tests
GB/T 12137-2002 — Method for leakage test of gas cylinders
GB 12350-2009 — Safety requirements of small-power motors
GB/T 13002-2008 — Rotating electrical machines - Thermal protection
GB 14536.3-2008 — Automatic electrical controls - Part 3: Particular requirements for thermal motor protectors
GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 39553-2020 — General specification for DC servo motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 15024-2025 — Brushless DC motor for electric compact shelving
JB/T 11703-2025 — Technical specifications for brushless DC motors for air conditioner fans
JB/T 11315-2013 — Specification for Permanent-magnet Synchronous Motor for Industrial Sewing Machine
6 Classification and status
International classification (ICS): 29.130.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 4942.1-2006Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- GB/T 5171-2002General technical conditions of small power motors
- GB/T 9651-2008Test methods for single-phase induction motors
GB 2828.1-2012
Similar standards
How to Download JB/T 11314-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12350-2009 — Safety requirements of small-power motors
GB 14536.3-2008 — Automatic electrical controls - Part 3: Particular requirements for thermal motor protectors
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
JB/T 11314-2013
$249.00