Valid

JB/T 4269-2013Specification for shaded pole asynchronous motors (English PDF)

罩极异步电动机通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4269-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 4269-2013 is the English-translated version of 罩极异步电动机通用技术条件.

Shaded pole asynchronous motors are the subject of JB/T 4269-2013, a recommended standard of the Chinese machinery industry. It sets the type, the basic parameters and the dimensions of these motors, and then the technical requirements, the test methods, the inspection rules and the requirements for marking, packaging, transportation and storage.

Its field of use is general purpose shaded pole induction motors. The standard sits under Chinese classification K24 and international classification 29.160.39, and was issued by the Ministry of Industry and Information Technology.

The references it quotes are GB/T 191, GB 755, GB/T 2423.3, GB/T 4942.1, GB/T 5171, GB/T 9651, GB/T 10069.1, GB 12350, GB/T 22719.1 and GB/T 22719.2. It supersedes JB/T 4269-2002.

Found what you need?

Document preview — JB/T 4269-2013

National Standard of the People's Republic of China

ICS
29.160.39
Replacing
JB/T 4269-2002

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 4269-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

It replaces the earlier edition JB/T 4269-2002, JB/T 4269-1986.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Shaded pole asynchronous motors are the subject of JB/T 4269-2013, a recommended standard of the Chinese machinery industry. It sets the type, the basic parameters and the dimensions of these motors, and then the technical requirements, the test methods, the inspection rules and the requirements for marking, packaging, transportation and storage. Its field of use is general purpose shaded pole induction motors. The standard sits under Chinese classification K24 and international classification 29.160.39, and was issued by the Ministry of Industry and Information Technology. The references it quotes are GB/T 191, GB 755, GB/T 2423.3, GB/T 4942.1, GB/T 5171, GB/T 9651, GB/T 10069.1, GB 12350, GB/T 22719.1 and GB/T 22719.2. It supersedes JB/T 4269-2002.

JB/T 4269-2013 falls under ICS 29.160.39, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191-2008 — Packaging - Pictorial marking for handling of goods

GB 755-2008 — Rotating Electrical Machines - Rating and Performance

GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state

GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

GB/T 5171-2002 — General technical conditions of small power motors

GB/T 9651-2008 — Test procedures for single-phase induction motor

GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines

GB 12350 - 2009 — Safety requirements of small-power motors

GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods

GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 4269-2002 (earlier edition)

JB/T 4269-1986 (earlier edition)

Standards on related subjects:

GB/T 39553-2020 — General specification for DC servo motors

GB/T 7345-2008 — General requirements for electrical machine for automatic control system

JB/T 9542-2025 — General technical specification for dual-value capacitor asynchronous motors

JB/T 3758-2025 — General technical specifications for electric motors for household washing machines

JB/T 4270-2025 — Technical specification for capacitor-operated asynchronous motors for room air conditioner fans

6 Classification and status

International classification (ICS): 29.160.39

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4269

EditionTitleRevisionStatus
JB/T 4269-2013Specification for shaded pole asynchronous motorscurrent editionCurrent
JB/T 4269-2002Specification for shaded pole asynchronous motorsprevious editionSuperseded

This page sells the current edition, JB/T 4269-2013. Earlier editions are listed for reference only.

How to Download JB/T 4269-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4269-2013

$189.00