JB/T 11207-2011Internal combustion engines - Cast-in iron cylinder liners - Technical requirements (English PDF)
内燃机 铸入式铸铁气缸套 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11207-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 11207-2011 is the English-translated version of 内燃机 铸入式铸铁气缸套 技术条件.
JB/T 11207-2011 is a recommended Chinese machinery industry standard for the cast-in iron cylinder liners of internal combustion engines. It sets out the terms and definitions, the technical requirements, the test methods and the inspection rules for these liners, and it also deals with signs, packaging, transport and storage.
The liners it covers are those of reciprocating piston internal combustion engines with a cylinder bore diameter of 150 mm or less. Chinese classification J92 and international classification 27.020 are recorded for the document.
Among the standards it quotes are GB/T 191, GB/T 223.4, GB/T 223.60 and GB/T 223.74.
Found what you need?
Document preview — JB/T 11207-2011
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 11207-2011 was issued by MIIT on 15 August 2011 and has been in force since 1 November 2011.
2 Scope
This standard is a recommended Chinese machinery industry standard for the cast-in iron cylinder liners of internal combustion engines. It sets out the terms and definitions, the technical requirements, the test methods and the inspection rules for these liners, and it also deals with signs, packaging, transport and storage. The liners it covers are those of reciprocating piston internal combustion engines with a cylinder bore diameter of 150 mm or less. Chinese classification J92 and international classification 27.020 are recorded for the document. Among the standards it quotes are GB/T 191, GB/T 223.4, GB/T 223.60 and GB/T 223.74.
3 Normative references
JB/T 11207-2011 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 191
GB/T 223.4
GB/T 223.60
GB/T 223.74
GB/T 223.21
GB/T 223.38
GB/T 223.18
GB/T 223.52
GB/T 223.12
GB/T 223.48
GB/T 223.43
GB/T 223.66
GB/T 223.63
GB/T 223.69
GB/T 223.86
GB/T 223.81
GB/T 223.17
GB/T 223.34
GB/T 223.5
GB/T 223.85
GB/T 223.13
GB/T 223.31
GB/T 223.28
GB/T 223.49
GB/T 223.62
GB/T 223.23
GB/T 223.32
GB/T 223.51
GB/T 223.40
GB/T 223.58
GB/T 223.83
GB/T 223.72
GB/T 223.30
GB/T 223.47
GB/T 223.14
GB/T 223.3
GB/T 223.65
GB/T 223.80
GB/T 223.50
GB/T 223.67
GB/T 223.41
GB/T 223.19
GB/T 223.29
GB/T 223.78
GB/T 223.36
GB/T 223.53
GB/T 223.16
GB/T 223.33
GB/T 223.57
GB/T 223.68
GB/T 223.84
GB/T 223.20
GB/T 223.37
GB/T 223.54
GB/T 223.11
GB/T 223.6
GB/T 223.75
GB/T 223.26
GB/T 223.46
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 223.4Alloyed steel - Determination of manganese content - Potentiometric or visual titration method
- GB/T 223.60Iron, steel and alloy - Determination of silicon content - Gravimetric method
- GB/T 223.74Methods for chemical analysis of iron，steel and alloy--The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content
- GB/T 223.21Methods for chemical analysis of iron, steel and alloy--The 5-Cl-PADAB spectrophotometricmethod for the determination of cobalt content
- GB/T 223.38Methods for chemical analysis of iron, steel and alloy. The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.48 · GB/T 223.58 · GB/T 223.53 · GB/T 223.16 · GB/T 223.57
Similar standards
How to Download JB/T 11207-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
GB/T 223.11-2008 — Iron, steel and alloy -- Determination of chromium content -- Visual titration or potentiometric titration method
GB/T 223.11-2025 — Iron, steel and alloy - Determination of chromium content - Titrimetric method and spectrophotometric method
Secure payment via Stripe
Payments accepted
JB/T 11207-2011
$105.00