JB/T 11099-2011Differentials for scroll discharge centrifuges - Cycloidal pin gear differentials (English PDF)
螺旋卸料离心机用差速器 摆线针轮差速器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11099-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 11099-2011 is the English-translated version of 螺旋卸料离心机用差速器 摆线针轮差速器.
JB/T 11099-2011 is a recommended Chinese machinery industry standard for the cycloidal pin gear differential used on scroll discharge centrifuges.
The document gives the types and basic parameters of this differential together with the technical requirements, the test methods, the inspection rules and the clauses on marking, packaging, transport and storage.
The differentials in its field are those of scroll discharge centrifuges. Among the standards it quotes are GB/T 1184-1996, GB/T 4774, GB/T 13384, GB 19815, JB/T 2982, JB/T 5288.1, JB/T 5288.3, JB/T 7253 and JB/T 10411.
Its Chinese classification number is J19 and its international classification number 21.200.
Found what you need?
Document preview — JB/T 11099-2011
National Standard of the People's Republic of China
- ICS
- 21.200
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Technical Requirements
- 4.1 Pallet
- 4.2 Pallet Package
- 5 Measurement and Evaluation Method
- 5.1 Paper Box and Calp Box
- 5.2 Wooden Box
- 6.1 Materials
- 6.2 Dimension and Tolerance
- 6.3 Box Making
- 6.4 Packing
- 6.5 Marks
- 7 Test Method
- 7.1 Material Test
- 7.2 Measurement of Dimensional Tolerance
- 7.3 Appearance Inspection
- 7.4 Property Test
- 8 Inspection rules
- 9 Marking, packaging, transportation and storage
1 Foreword
JB/T 11099-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the cycloidal pin gear differential used on scroll discharge centrifuges. The document gives the types and basic parameters of this differential together with the technical requirements, the test methods, the inspection rules and the clauses on marking, packaging, transport and storage. The differentials in its field are those of scroll discharge centrifuges. Among the standards it quotes are GB/T 1184-1996, GB/T 4774, GB/T 13384, GB 19815, JB/T 2982, JB/T 5288.1, JB/T 5288.3, JB/T 7253 and JB/T 10411. Its Chinese classification number is J19 and its international classification number 21.200.
JB/T 11099-2011 falls under ICS 21.200, in the field of mechanical systems and components.
This catalogue holds 260 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 4774
GB/T 6388
GB/T 13384
GB 19815
JB/T 2982
JB/T 5288.1
JB/T 5288.3
JB/T 7217
JB/T 7253
JB/T 9095
JB/T 10411
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 9050.2-2024 — General technical requirement - Part 2: The determination method for contact spot
GB/T 5015-2017 — Gear coupling with elastomer
GB/T 14118-1993 — Harmonic drive reducers
JB/T 15078-2025 — Drum gear coupling for hot rolling endless finishing mill
JB/T 11587-2025 — Large tooth-type electromagnetic clutch
JB/T 11100-2011 — Differentials for scroll discharge centrifuges - Involute planetary gear differentials
6 Classification and status
International classification (ICS): 21.200
Chinese Standard Classification (CCS): J 19
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 4774Terminology of filtration and separation
- GB/T 6388Transport package shipping mark
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB 19815Centrifuge - Safety requirements
Similar standards
How to Download JB/T 11099-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 19815-2005 — Safety requirements for centrifuge
GB 19815-2021 — Centrifuge - Safety requirements
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
JB/T 11099-2011
$165.00