JB/T 5288.1-1991Cycloidal pinwheel speed reducers - Determination of temperature rise (English PDF)
摆线针轮减速机 温升测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5288.1-1991 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 22, 1991
Implementation date
July 1, 1992
Scope
JB/T 5288.1-1991 is the English-translated version of 摆线针轮减速机 温升测定方法.
JB/T 5288.1-1991 is the Chinese machinery industry standard covering cycloidal pinwheel speed reducers - Determination of temperature rise. It was issued on 22 July 1991 and has been in force since 1 July 1992, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1991 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 5288.1-1991
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5288.1-1991 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 July 1991 and has been in force since 1 July 1992.
It is one of 3 parts of the JB/T 5288 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 5288.1-1991 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 5288.2-1991 — Cycloidal pinwheel speed reducers - Determination of cleanliness
JB/T 5288.3-1991 — Cycloidal pinwheel speed reducers - Determination of load capacity and transmission efficiency
Standards on related subjects:
GB/T 5014-2017 — Pin coupling elastomer
GB/T 5015-2017 — Gear coupling with elastomer
JB/T 5558-2015 — Test methods for speed reducers and increasers
JB/T 7936-2025 — Straight profile toroidal worm reducer
JB/T 7682-2025 — Serpentine spring safety coupling
JB/T 5512-2025 — Polygonal rubber coupling
5 Classification and status
Chinese Standard Classification (CCS): J 19
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 5288.1-1991
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 5288.2-1991 — Cycloidal pinwheel speed reducers - Determination of cleanliness
JB/T 5288.3-1991 — Cycloidal pinwheel speed reducers - Determination of load capacity and transmission efficiency
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 5288.1-1991
$85.00