JB/T 11003-2010Vertical preheaters for calcining active lime (English PDF)
煅烧活性石灰用竖式预热器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11003-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11003-2010 is the English-translated version of 煅烧活性石灰用竖式预热器.
The vertical preheater for calcining lime is the subject of JB/T 11003-2010, a recommended standard of the Chinese machinery industry. It sets the types of preheater and their basic parameters, the technical requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.
The preheaters it addresses belong to production systems for active and reactive magnesium oxide and calcium oxide in metallurgy, non-ferrous metals, the chemical industry, environmental protection and other industries.
Among the standards it quotes are GB/T 700-2006, GB/T 1031-2009, GB/T 1591-2008, GB/T 4237-2007, GB 50017-2003, JB/T 1604, JB/T 5000.3 and JB/T 6403-1992. Classification places it at D94 and at 73.120.
Found what you need?
Document preview — JB/T 11003-2010
National Standard of the People's Republic of China
- ICS
- 73.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11003-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The vertical preheater for calcining lime is the subject of JB/T 11003-2010, a recommended standard of the Chinese machinery industry. It sets the types of preheater and their basic parameters, the technical requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. The preheaters it addresses belong to production systems for active and reactive magnesium oxide and calcium oxide in metallurgy, non-ferrous metals, the chemical industry, environmental protection and other industries. Among the standards it quotes are GB/T 700-2006, GB/T 1031-2009, GB/T 1591-2008, GB/T 4237-2007, GB 50017-2003, JB/T 1604, JB/T 5000.3 and JB/T 6403-1992. Classification places it at D94 and at 73.120.
JB/T 11003-2010 falls under ICS 73.120, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 700-2006 — Carbon structural steels
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1591-2008 — [GB 1591-2018] High strength low alloy structural steels
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 4237-2007 — Hot rolled stainless steel plate, sheet and strip
GB/T 13306
GB 50017-2003 — Code for design of steel structures
JB/T 1604
JB/T 5000.3
JB/T 5000.6
JB/T 5000.12
JB/T 5000.13
JB/T 6403-1992 — Large heat-resistant steel castings
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 10993-2021 — Single-outlet bowl mills
JB/T 11001-2019 — Magnetic liners for ball mills - Technical requirements
JB/T 10997-2018 — Vertical roller mills for slag cement
6 Classification and status
International classification (ICS): 73.120
Chinese Standard Classification (CCS): D 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 700-2006Carbon structural steels
- GB/T 1031-2009Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1591-2008High strength low alloy structural steels
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 4237-2007Hot rolled stainless steel plate, sheet and strip
Similar standards
How to Download JB/T 11003-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50017-2003 — Code for design of steel structures
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
JB/T 11003-2010
$85.00