JB/T 10899-2008Downstream equipment for plastics double-wall corrugated pipe extrusion (English PDF)
塑料挤出双壁波纹管辅机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10899-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10899-2008 is the English-translated version of 塑料挤出双壁波纹管辅机.
The downstream equipment for extruding double-wall corrugated plastic pipe is covered by JB/T 10899-2008, a recommended standard of the Chinese machinery industry.
It defines terminology, basic parameters and the basic components of this auxiliary line, then sets requirements, test methods and test rules, and the provisions for marking, packaging, transport and storage.
It applies to machinery used together with an extruder, which forms double-wall corrugated pipe from the melt. The plastics named for this purpose are the polyolefins PE and PP and unplasticized PVC.
Among the standards it quotes are GB 5226.1, GB/T 12783, GB/T 18477 and GB/T 19472.1. It carries the Chinese classification code G95 and the international classification 83.200.
Found what you need?
Document preview — JB/T 10899-2008
National Standard of the People's Republic of China
- ICS
- 83.200
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10899-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The downstream equipment for extruding double-wall corrugated plastic pipe is covered by JB/T 10899-2008, a recommended standard of the Chinese machinery industry. It defines terminology, basic parameters and the basic components of this auxiliary line, then sets requirements, test methods and test rules, and the provisions for marking, packaging, transport and storage. It applies to machinery used together with an extruder, which forms double-wall corrugated pipe from the melt. The plastics named for this purpose are the polyolefins PE and PP and unplasticized PVC. Among the standards it quotes are GB 5226.1, GB/T 12783, GB/T 18477 and GB/T 19472.1. It carries the Chinese classification code G95 and the international classification 83.200.
JB/T 10899-2008 falls under ICS 83.200, in the field of rubber and plastics industries.
This catalogue holds 13 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 2894
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB 9969.1
GB/T 12783
GB/T 13306
GB/T 13384
GB/T 18477
GB/T 19472.1
QB/T 1916
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
JB/T 15040-2025 — Plastic extrusion profile chipless cutting machine
JB/T 13448-2018 — Screw-plunger plastic injection moulding machines
JB/T 10898-2008 — Downstream equipment for plastics composite film extrusion
6 Classification and status
International classification (ICS): 83.200
Chinese Standard Classification (CCS): G 95
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 2894Safety colours and safety signs
- GB 5226.1-2002Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB 9969.1General principles for preparation of instructions for use of industrial products
- GB/T 12783Editorial nominating method for the modeldesignation of rubber and plastics machinery
Similar standards
How to Download JB/T 10899-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 10899-2008
$135.00