JB/T 10864-2008Cylindricity measuring instruments (English PDF)
圆柱度测量仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10864-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 12, 2008
Implementation date
September 1, 2008
Scope
JB/T 10864-2008 is the English-translated version of 圆柱度测量仪.
JB/T 10864-2008 is the recommended Chinese machinery industry standard for cylindricity measuring instruments. It opens with terms and definitions, then fixes the structure and the basic parameters of the instrument, the technical requirements and the test methods, and closes with inspection rules, marking and packaging.
Among the standards it quotes are GB/T 7234-2004, GB/T 7235-2004, GB/T 17163-1997 and the international documents ISO/TS 12180-1-2003 and ISO/TS 12181-1-2003. The classification codes recorded for it are J42 in the Chinese system and 17.040.30 in the international one.
Found what you need?
Document preview — JB/T 10864-2008
National Standard of the People's Republic of China
- ICS
- 17.040.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10864-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 March 2008 and has been in force since 1 September 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for cylindricity measuring instruments. It opens with terms and definitions, then fixes the structure and the basic parameters of the instrument, the technical requirements and the test methods, and closes with inspection rules, marking and packaging. Among the standards it quotes are GB/T 7234-2004, GB/T 7235-2004, GB/T 17163-1997 and the international documents ISO/TS 12180-1-2003 and ISO/TS 12181-1-2003. The classification codes recorded for it are J42 in the Chinese system and 17.040.30 in the international one.
JB/T 10864-2008 falls under ICS 17.040.30, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 4879-1999 — Rustproof packaging
GB/T 5048-1999 — Moistureproof packaging
GB/T 6388-1986 — Transport package shipping mark
GB/T 7234-2004 — Geometrical Product Specifications(GPS)--Measurement of roundness--Terms,definitions and parameters of roundness
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents
GB/T 17163-1997 — Glossary of terms used in dimensional measuring instruments--General terms
GB/T 17164-1997 — Glossary of terms used in dimensional measuring instruments--Product terms
ISO/TS 12180-1-2003
ISO/TS 12181-1-2003
GB/T 7235-2004 — Geometrical Product Specifications(GPS)--Methods for the assessment of departure from roundness--Measurement of variations in radius
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 10932-2024 — Screw thread micrometer
GB/T 1218-2018 — Depth micrometer
GB/T 1957-2006 — Tolerances and general features for plain limit gauges
JB/T 15356-2025 — Geometric digital display devices Terminology
JB/T 10866-2008 — Dial snap gauges
JB/T 10865-2008 — Limit gauges for unified screw threads
6 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): J 42
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2000Graphical symbols marking for handling and storage of packages
- GB/T 4879-1999Rustproof packaging
- GB/T 5048-1999Moisture-proof packaging
- GB/T 6388-1986Transport package shipping mark
- GB/T 7234-2004Geometrical Product Specifications(GPS)--Measurement of roundness--Terms,definitions and parameters of roundness
- GB 9969.1-1998General principles for preparation of instructions for use of industrial products
ISO/TS 12180-1-2003 · ISO/TS 12181-1-2003
Similar standards
How to Download JB/T 10864-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents
GB/T 17163-1997 — Glossary of terms used in dimensional measuring instruments--General terms
JB/T 10864-2008
$135.00