Valid

JB/T 10848-2008Carbide edge trimming cutters for woodworking (English PDF)

木工硬质合金封边刀

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10848-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 10848-2008 is the English-translated version of 木工硬质合金封边刀.

JB/T 10848-2008 is a recommended Chinese machinery industry standard for the carbide edge trimming cutters used on woodworking edge banding machines, the tools the text shortens to edge cutters.

It fixes their structural types and their dimensions, the technical requirements the cutters have to satisfy, and the test methods by which those requirements are checked.

The inspection rules are laid down as well, and the closing provisions deal with marking and packaging. In the Chinese standard classification the document carries the code J65, and its international classification is 79.120.10. It quotes GB/T 191-2000 and GB/T 13384-1992 among other documents.

Found what you need?

Document preview — JB/T 10848-2008

National Standard of the People's Republic of China

ICS
79.120.10

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 10848-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for the carbide edge trimming cutters used on woodworking edge banding machines, the tools the text shortens to edge cutters. It fixes their structural types and their dimensions, the technical requirements the cutters have to satisfy, and the test methods by which those requirements are checked. The inspection rules are laid down as well, and the closing provisions deal with marking and packaging. In the Chinese standard classification the document carries the code J65, and its international classification is 79.120.10. It quotes GB/T 191-2000 and GB/T 13384-1992 among other documents.

JB/T 10848-2008 falls under ICS 79.120.10, in the field of wood technology.

This catalogue holds 60 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191-2000 — Packaging-Pictorial marking for handling of goods

GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements

GB 3836.3-2000 — Electrical apparatus for explosive gas atmospheres-Part 3: Increased safety e

GB/T 11918-2001 — Industrial plugs and sockets and couplers - Part 1: General requirements

GB/T 11919-2001 — Industrial plugs and sockets and couplers - Part 2: Dimensional interchangeability requirements with a bolt and socket electrical accessories

GB 12476.1-2000 — Electrical apparatus for use in the presence of combustible dust--Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation-Specification for apparatus

GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products

GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

JB/T 13910.2-2020 — Stacking machines - Part 2: Technical requirements

JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters

GB/T 8118-2010 — The general specification for arc welding machines

JB/T 10852-2008 — Vertical and horizontal dual-purpose sanders - Accuracy

JB/T 10851-2008 — Woodworking scroll saws - Accuracy

JB/T 10850-2008 — Double-sided straight and curved edge banding machines - Accuracy

6 Classification and status

International classification (ICS): 79.120.10

Chinese Standard Classification (CCS): J 65

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 10848-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10848-2008

$105.00