JB/T 10494-2005Reliability test method for residual current operated circuit-breakers for household and similar uses (English PDF)
家用和类似用途的剩余电流动作断路器的可靠性试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10494-2005 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 19, 2005
Implementation date
September 1, 2005
Scope
JB/T 10494-2005 is the English-translated version of 家用和类似用途的剩余电流动作断路器的可靠性试验方法.
JB/T 10494-2005 is the Chinese machinery industry standard covering reliability test method for residual current operated circuit-breakers for household and similar uses.
It was issued on 19 March 2005 and has been in force since 1 September 2005, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2005 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10494-2005
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10494-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 19 March 2005 and has been in force since 1 September 2005.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 10494-2005 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 7251.2-2023 — Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
GB/T 7251.6-2015 — Low-voltage switchgear and controlgear assemblies -- Part 6: Busbar trunking systems (busways)
GB 7251.12-2013 — [GB/T 7251.12-2013] Low-voltage switchgear and controlgear assemblies -- Part 2: Power switchgear and controlgear assemblies
JB/T 14947-2025 — Technical requirements for digital workshop of miniature circuit breakers
JB/T 14942-2025 — Technical specifications for evaluation of green design products - Plastic enclosure circuit breaker
JB/T 14941-2025 — Technical specifications for evaluation of green design products - Circuit-breakers for overcurrent protection for household and similar installations
5 Classification and status
Chinese Standard Classification (CCS): K 31
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 10494-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 10494-2005
$195.00