Valid

JB/T 10491.4-2004Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750 V - Part 4: Cross-linked polyolefin insulated cables with 150 °C heat resistance (English PDF)

额定电压450/750V及以下交联聚烯烃绝缘电线和电缆 第4部分:耐热150℃交联聚烯烃绝缘电缆

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10491.4-2004 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 20, 2004

Implementation date

April 1, 2005

Scope

JB/T 10491.4-2004 is the English-translated version of 额定电压450/750V及以下交联聚烯烃绝缘电线和电缆 第4部分:耐热150℃交联聚烯烃绝缘电缆.

JB/T 10491.4-2004 is the Chinese standard "Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750 V - Part 4: Cross-linked polyolefin insulated cables with 150 °C heat resistance".

Its scope clause reads: This part specifies the models, specifications, technical requirements and inspections of cross-linked polyolefin insulated cables with rated voltages up to and including 450/750V for maximum conductor temperature of 150°C in normal operation.

This part is applicable to copper conductors and cross-linked polyolefin insulated cables (with rated voltages up to and including 450/750V for maximum conductor temperature of 150°C in normal operation) used for fixed wiring and power and electronic equipment internal connection. Its clauses include service characteristics; models.

Found what you need?

Document preview — JB/T 10491.4-2004

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Service characteristics
  • 4 Models
  • 5 Specifications
  • 6 Technical requirements
  • 6.1 Conductor
  • 6.2 Insulation
  • 6.3 Cabling of insulated cores
  • 6.4 Sheath
  • 6.5 Overall dimension
  • 7 Inspection
  • Table 1 Models and names
  • Table 2 Specifications
  • Table 7 Inspection
  • .detail td {

1 Scope

This part specifies the models, specifications, technical requirements and inspections of cross-linked polyolefin insulated cables with rated voltages up to and including 450/750V for maximum conductor temperature of 150°C in normal operation.

This part is applicable to copper conductors and cross-linked polyolefin insulated cables (with rated voltages up to and including 450/750V for maximum conductor temperature of 150°C in normal operation) used for fixed wiring and power and electronic equipment internal connection.

2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of JB/T 10491. For dated references, subsequent amendments to (excluding corrections), or revisions, of any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

GB/T 2951.1-1997 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section one: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties (idt IEC 60811-1-1: 1993)

GB/T 2951.2-1997 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section two: Thermal ageing methods (idt IEC 60811-1-2: 1985)

GB/T 2951.3-1997 Common test methods for insulating and sheathing materials of electric cable - Part 1: Methods for general application--Section three: Methods for determining the density - Water absorption tests - Shrinkage test (idt IEC 60811-1-3: 1993)

GB/T 2951.4-1997 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application (idt IEC 60811-1-4: 1985)

GB/T 2951.5-1997 Common test methods for insulating and sheathing materials of electric cables - Part 2: Methods specific to elastomeric compounds - Section one: Ozone resistance test - Hot set test - Mineral oil immersion test (idt IEC 60811-2-1: 1986)

GB/T 3956-1997 Conductors of insulated cables (idt IEC 60228: 1978)

GB/T 17650.2-1998 Test on gases evolved during combustion of materials from cables - Part 2: Determination of degree of acidity of gases by measuring pH and conductivity (idt IEC 60754-2: 1991)

GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements (idt IEC 61034-2: 1997)

GB/T 18380.1-2001 Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable (idt IEC 60332-1: 1993)

GB/T 18380.2-2001 Tests on electric cables under fire conditions - Part 2: Test on a single small vertical insulated copper wire or cable (idt IEC 60332-2:1989)

GB/T 18380.3-2001 Tests on electric cables under fire conditions - Part 3: Tests on bunched wires or cables (idt IEC 60332-3: 1992)

JB/T 10491.1-2004 Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V - Part 1: General requirements

3 Service characteristics

The rated voltage of cables, U0/U, shall be 450/750V and 300/500V.

The long-term permissible working temperature of cables shall not be higher than 150 °C.

4 Models

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 10491.4-2004

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10491.4-2004

$155.00