Valid

JB/T 10486-2017Inserting machine (English PDF)

嵌线机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10486-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 12, 2017

Implementation date

January 1, 2018

Scope

JB/T 10486-2017 is the English-translated version of 嵌线机.

JB/T 10486-2017 is the Chinese mechanical industry standard for the inserting machine used on small and medium-sized motors.

It sets the terms and definitions, the models, the technical requirements, the test methods and the inspection rules for the machine, and adds the provisions for marking, packaging, transport, storage, installation, use and maintenance.

It applies to devices that insert coils into motor stators with a core stack thickness from 15 mm to 400 mm. It quotes GB/T 191, GB/T 2900.39, GB/T 13306, GB/T 13384, GB/T 16769 and GB/T 23644. Classified K92 and 29.100.01, it replaces JB/T 10486-2004.

Found what you need?

Document preview — JB/T 10486-2017

National Standard of the People's Republic of China

ICS
29.100.01
Replacing
JB/T 10486-2004

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 10486-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 April 2017.

It replaces the earlier edition JB/T 10486-2004.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese mechanical industry standard for the inserting machine used on small and medium-sized motors. It sets the terms and definitions, the models, the technical requirements, the test methods and the inspection rules for the machine, and adds the provisions for marking, packaging, transport, storage, installation, use and maintenance. It applies to devices that insert coils into motor stators with a core stack thickness from 15 mm to 400 mm. It quotes GB/T 191, GB/T 2900.39, GB/T 13306, GB/T 13384, GB/T 16769 and GB/T 23644. Classified K92 and 29.100.01, it replaces JB/T 10486-2004.

JB/T 10486-2017 falls under ICS 29.100.01, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 2900.39

GB/T 13306

GB/T 13384

GB/T 16769

GB/T 23644

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 10486-2004 (earlier edition)

Standards on related subjects:

GB/T 43962.1-2024 — System integration of power battery digital workshop - Part 1: General requirements

DL/T 646-2012 — Manufacturing technical requirements for steel tubular structures of substation and transmission line

JB/T 10488-2017 — Slot insulation shaping and cutting machine

JB/T 11341-2013 — Stator Over-hang Coil Lacing Machine for Small-sized Motor

JB/T 10487-2013 — Stator Coil Winding Machine for Small-sized Motor

6 Classification and status

International classification (ICS): 29.100.01

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Editions of JB/T 10486

EditionTitleRevisionStatus
JB/T 10486-2017Inserting machinecurrent editionCurrent
JB/T 10486-2004Inserting machineprevious editionSuperseded

This page sells the current edition, JB/T 10486-2017. Earlier editions are listed for reference only.

How to Download JB/T 10486-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10486-2017

$135.00