JB/T 10457-2004Liquid quenching cooling equipment - Technical requirements (English PDF)
液态淬火冷却设备 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10457-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 17, 2004
Implementation date
November 1, 2004
Scope
JB/T 10457-2004 is the English-translated version of 液态淬火冷却设备 技术条件.
JB/T 10457-2004 is the Chinese machinery industry standard covering liquid quenching cooling equipment - Technical requirements. It was issued on 17 June 2004 and has been in force since 1 November 2004, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2004 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10457-2004
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10457-2004 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 June 2004 and has been in force since 1 November 2004.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 10457-2004 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 10457-2025 (later edition)
Standards on related subjects:
GB/T 11354-2025 — Determination of nitriding hardness depth and metallographic examination for steel
GB/T 9452-2023 — Test method for qualified work zone of heat treatment furnace
JB/T 10174-2008 — Quality inspection methods for shot peening of iron and steel parts
JB/T 14952-2025 — Evaluation requirements for green factory in the vacuum heat treatment furnace manufacturing industry
JB/T 14951-2025 — Evaluation Requirements for Green Factory in the Thermal Treatment Industry
JB/T 14765-2025 — Energy consumption limits and evaluation methods for heat treatment
5 Classification and status
Chinese Standard Classification (CCS): J 36
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 39191-2020Heat treatment for stainless steel and heat resistant steel parts
- GB/T 39192-2020Heat treatment of superalloy parts
- JB/T 10895-2008Technical requirements for heat treatment on controlled atmosphere sealed quench furnace lines
- JB/T 10897-2008Technical requirements for heat treatment on mesh belt furnace lines
Similar standards
How to Download JB/T 10457-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 10457-2004
$205.00