JB/T 10279-2013Cylinder Drier (English PDF)
滚筒干燥机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10279-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 10279-2013 is the English-translated version of 滚筒干燥机.
JB/T 10279-2013 is a recommended Chinese machinery industry standard for cylinder driers. It describes the structural types of the machine and its basic parameters, then sets the technical requirements, the test methods, the inspection rules and the requirements for marking, packaging, transport and storage.
It applies to the drying of suspensions and emulsions. The standard carries the Chinese classification J78 and the international classification 23.160, and the Ministry of Industry and Information Technology issued it.
Among the standards it quotes are GB 150.1, GB 150.2, GB/T 1031-2009, GB/T 3768, GB 5226.1-2008, JB/T 6924 and TSG R0004-2009. It replaces the earlier edition JB/T 10279-2001.
Found what you need?
Document preview — JB/T 10279-2013
National Standard of the People's Republic of China
- ICS
- 23.160
- Replacing
- JB/T 10279-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10279-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 10279-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for cylinder driers. It describes the structural types of the machine and its basic parameters, then sets the technical requirements, the test methods, the inspection rules and the requirements for marking, packaging, transport and storage. It applies to the drying of suspensions and emulsions. The standard carries the Chinese classification J78 and the international classification 23.160, and the Ministry of Industry and Information Technology issued it. Among the standards it quotes are GB 150.1, GB 150.2, GB/T 1031-2009, GB/T 3768, GB 5226.1-2008, JB/T 6924 and TSG R0004-2009. It replaces the earlier edition JB/T 10279-2001.
JB/T 10279-2013 falls under ICS 23.160, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 150.1
GB 150.2
GB 150.3
GB 150.4
GB/T 191
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 3768
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 10111
GB/T 13306
JB/T 6924
SJ/T 10674-1995 — Generic specification for coating with coat
TSG R0004-2009 — Supervision Regulation on Safety Technology for Stationary Pressure Vessel ,including Amendment 1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10279-2001 (earlier edition)
Standards on related subjects:
GB/T 10894-2023 — Determination method of separation machinery noise
JB/T 4333.2-2013 — Recessed plate filter press & plate and frame filter press - Part 2: Technical specifications
JB/T 8947-2008 — Rubber belts for fixed chamber belt vacuum filters
JB/T 14960-2025 — Minimum allowable values of the energy efficiency and energy efficiency grades for vacuum drying equipment systems
JB/T 11716-2025 — Screw type dry vacuum pump
JB/T 10278-2015 — Flash dryers
6 Classification and status
International classification (ICS): 23.160
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150.1Pressure vessels—Part 1:General requirements
- GB 150.2Pressure Vessels-Part 2: Materials
- GB 150.3Pressure Vessels -Part3: Design
- GB 150.4Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1031-2009Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
TSG R0004-2009
Editions of JB/T 10279
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10279-2013 | Cylinder Drier | current edition | Current |
| JB/T 10279-2001 | Cylinder Drier | previous edition | Superseded |
This page sells the current edition, JB/T 10279-2013. Earlier editions are listed for reference only.
How to Download JB/T 10279-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 10279-2013
$135.00