JB/T 10246-2015Impact crushers for hard rock (English PDF)
硬岩反击式破碎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10246-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 10246-2015 is the English-translated version of 硬岩反击式破碎机.
JB/T 10246-2015 is the recommended machinery industry standard of China for impact crushers used on hard rock. It lays down the types and basic parameters of the machine, its technical requirements, the test methods and the inspection rules, and the provisions for marking, packaging, transport and storage.
The machines in question are single-rotor impact crushers working on hard rock and on brittle non-metallic materials with a crushing strength of 300 MPa or less.
Among the standards it quotes are GB/T 191, GB/T 699-1999, GB/T 5680, GB/T 8263, GB/T 25706, JB/T 5000.3 and JB/T 5000.12-2007. The 2001 edition, JB/T 10246-2001, is superseded by it. Its Chinese classification is D94.
Found what you need?
Document preview — JB/T 10246-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 10246-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10246-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 10246-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended machinery industry standard of China for impact crushers used on hard rock. It lays down the types and basic parameters of the machine, its technical requirements, the test methods and the inspection rules, and the provisions for marking, packaging, transport and storage. The machines in question are single-rotor impact crushers working on hard rock and on brittle non-metallic materials with a crushing strength of 300 MPa or less. Among the standards it quotes are GB/T 191, GB/T 699-1999, GB/T 5680, GB/T 8263, GB/T 25706, JB/T 5000.3 and JB/T 5000.12-2007. The 2001 edition, JB/T 10246-2001, is superseded by it. Its Chinese classification is D94.
JB/T 10246-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels
GB/T 3768
GB/T 5680
GB/T 8263
GB/T 9239.1
GB/T 13306
GB/T 13384
GB/T 25706
JB/T 5000.3
JB/T 5000.12-2007 — General technical requirements for heavy machinery - Part 12: Painting
JB/T 5000.15
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10246-2001 (earlier edition)
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 14593-2025 — Single-cylinder hydraulic cone crusher - Hydraulic and lubrication devices
JB/T 10343-2025 — Vertical compound crusher
JB/T 10245-2015 — Double roll crushers
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 699-1999Quality carbon structure steels
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 5680Austenitic manganese steel castings
- GB/T 8263Abrasion-resistant white iron castings
- GB/T 9239.1Mechanical vibration—Rotor balancing—Part 1:Introduction
Similar standards
Editions of JB/T 10246
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10246-2015 | Impact crushers for hard rock | current edition | Current |
| JB/T 10246-2001 | Impact crushers for hard rock | previous edition | Superseded |
This page sells the current edition, JB/T 10246-2015. Earlier editions are listed for reference only.
How to Download JB/T 10246-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 10246-2015
$149.00