JB/T 10127.2-1999Parts and units of machine tool fixtures - Isosceles angle plates (English PDF)
机床夹具零件及部件 等腰角铁
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10127.2-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 6, 1999
Implementation date
January 1, 2000
Scope
JB/T 10127.2-1999 is the English-translated version of 机床夹具零件及部件 等腰角铁.
JB/T 10127.2-1999 is the Chinese standard "Parts and units of machine tool fixtures - Isosceles angle plates". Its scope clause reads: This standard specifies isosceles angle plates of sizes 200 mm to 800 mm.
Found what you need?
Document preview — JB/T 10127.2-1999
National Standard of the People's Republic of China
- Replacing
- GB/T 12894-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Dimensions
1 Scope
This standard specifies isosceles angle plates of sizes 200 mm to 800 mm.
2 Normative references
The provisions contained in the following standards become provisions of this standard through reference in this standard. The editions shown were valid at the time of publication of this standard. All standards are subject to revision, and the parties using this standard should consider the possibility of applying the latest editions of the standards listed below.
GB/T 9439-1988 Grey iron castings
JB/T 8044-1999 Technical requirements for the parts and units of jigs and fixtures
3 Dimensions
The dimensions are those shown in the figure and the table. The plate has n1 through holes of diameter d and n through slots of width b; the length is L, the height B, the wall thickness t and the slot pitch l. The two working faces are scraped to a surface roughness of Ra 3,2 micrometres and their squareness is within 0,02 mm over 300 mm relative to datum A.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 10127.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10127.2-1999 | Parts and units of machine tool fixtures - Isosceles angle plates | current edition | Current |
| GB/T 12894-1991 | Parts and units of machine tool fixtures - Isosceles angle plates | previous edition | Superseded |
This page sells the current edition, JB/T 10127.2-1999. Earlier editions are listed for reference only.
How to Download JB/T 10127.2-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10127.3-1999 — Parts and units of machine tool fixtures - Unequal angle plates
JB/T 10127.1-1999 — Parts and units of machine tool fixtures - Equal angle plates
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
Secure payment via Stripe
Payments accepted
JB/T 10127.2-1999
$65.00