JB/T 10105-2017YZR series wound-rotor three-phase induction motors for crane and metallurgical applications - Specification (English PDF)
YZR系列起重及冶金用绕线转子三相异步电动机 技术条件
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10105-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
JB/T 10105-2017 is the English-translated version of YZR系列起重及冶金用绕线转子三相异步电动机 技术条件.
JB/T 10105-2017 is the Chinese mechanical industry standard for YZR series wound-rotor three-phase induction motors intended for cranes and metallurgical plant.
It lays down the type, the basic parameters and dimensions and the technical requirements of these motors, then the inspection rules and test methods, and finally the requirements for marking, packaging and the warranty period.
Issued as a recommended standard by the Ministry of Industry and Information Technology, it sits under Chinese classification K26 and international classification 29.160.30.
It quotes GB 755, GB/T 756, GB/T 1032, GB/T 4942.1 and GB/T 12351, among other standards it quotes. It replaces JB/T 10105-1999.
Found what you need?
Document preview — JB/T 10105-2017
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Replacing
- JB/T 10105-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10105-2017 was issued by MIIT on 7 November 2017 and has been in force since 1 April 2018.
It replaces the earlier edition JB/T 10105-1999.
2 Scope
This standard is the Chinese mechanical industry standard for YZR series wound-rotor three-phase induction motors intended for cranes and metallurgical plant. It lays down the type, the basic parameters and dimensions and the technical requirements of these motors, then the inspection rules and test methods, and finally the requirements for marking, packaging and the warranty period. Issued as a recommended standard by the Ministry of Industry and Information Technology, it sits under Chinese classification K26 and international classification 29.160.30. It quotes GB 755, GB/T 756, GB/T 1032, GB/T 4942.1 and GB/T 12351, among other standards it quotes. It replaces JB/T 10105-1999.
3 Normative references
JB/T 10105-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191-2008
GB 755
GB/T 756-2010 — Cylindrical shaft extension for rotating electrical machines
GB/T 757-2010 — Conical shaft extension for rotating electrical machines
GB/T 997-2008
GB/T 1032-2012
GB/T 1096-2003 — Square and rectangular keys
GB/T 1958-2004
GB 1971
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 4772.1-1999
GB/T 4942.1-2006
GB 10068
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB 10069.3
GB/T 12351-2008 — Environmental technical requirements of rotating electric machines for tropical use
4 About this standard
Issued by: MIIT
English translation: about 20 pages
5 Related standards
Other editions:
JB/T 10105-1999 (earlier edition)
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 756-2010Cylindrical shaft extension for rotating electrical machines
- GB/T 757-2010Conical shaft extension for rotating electrical machines
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1032-2012Test methods for three-phase asynchronous motors
- GB/T 1096-2003Square and rectangular keys
GB 755 · GB 1971 · GB/T 4942.1-2006 · GB 10068 · GB 10069.3
Similar standards
Editions of JB/T 10105
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10105-2017 | YZR series wound-rotor three-phase induction motors for crane and metallurgical applications - Specification | current edition | Current |
| JB/T 10105-1999 | YZR series wound-rotor three-phase induction motors for crane and metallurgical applications - Specification | previous edition | Superseded |
This page sells the current edition, JB/T 10105-2017. Earlier editions are listed for reference only.
How to Download JB/T 10105-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 1096-2003 — Square and rectangular keys
GB/T 12351-2008 — Environmental technical requirements of rotating electric machines for tropical use
Secure payment via Stripe
Payments accepted
JB/T 10105-2017
$425.00