JB/T 10000-2013Thread rolling dies for 55° taper pipe threads (English PDF)
55°圆锥管螺纹滚丝轮
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10000-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 10000-2013 is the English-translated version of 55°圆锥管螺纹滚丝轮.
JB/T 10000-2013 is a recommended Chinese machinery industry standard on thread rolling dies for taper pipe threads with a 55-degree thread angle. The document fixes the type and dimensions of these rolling dies, the tooth dimensions and their limit deviations, the technical requirements, and the basic provisions for marking and packaging.
It applies to dies worked on sealing pipe threads designated R. Its Chinese classification is J41 and its international classification 25.100.99. Among the standards it quotes are GB/T 7306.1 and GB/T 7306.2.
JB/T 10000-2013 replaces the earlier edition JB/T 10000-1999, and the Ministry of Industry and Information Technology is recorded as the issuing agency.
Found what you need?
Document preview — JB/T 10000-2013
National Standard of the People's Republic of China
- ICS
- 25.100.99
- Replacing
- JB/T 10000-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 10000-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 10000-1999.
2 Scope
This standard is a recommended Chinese machinery industry standard on thread rolling dies for taper pipe threads with a 55-degree thread angle. The document fixes the type and dimensions of these rolling dies, the tooth dimensions and their limit deviations, the technical requirements, and the basic provisions for marking and packaging. It applies to dies worked on sealing pipe threads designated R. Its Chinese classification is J41 and its international classification 25.100.99. Among the standards it quotes are GB/T 7306.1 and GB/T 7306.2. JB/T 10000-2013 replaces the earlier edition JB/T 10000-1999, and the Ministry of Industry and Information Technology is recorded as the issuing agency.
3 Normative references
JB/T 10000-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 7306.1
GB/T 7306.2
4 Where this standard sits
JB/T 10000-2013 is classified under ICS 25.100.99, in the field of manufacturing engineering.
It cites 2 standards, listed in full above.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other editions:
JB/T 10000-1999 (earlier edition)
Standards on related subjects:
GB/T 972-2008 — Thread rolling flat dies
GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines
GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines
JB/T 10004-2013 — Technical specifications for carbide skiving hobs
JB/T 10003-2013 — Taper shank twist drills for 1:50 taper holes
JB/T 10002-2013 — Long parallel shank twist drills
7 Classification and status
International classification (ICS): 25.100.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 7306.1Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 1: Parallel internal and taper external threads
- GB/T 7306.2Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 2: Taper internal and external threads
Similar standards
Editions of JB/T 10000
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10000-2013 | Thread rolling dies for 55° taper pipe threads | current edition | Current |
| JB/T 10000-1999 | Thread rolling dies for 55° taper pipe threads | previous edition | Superseded |
This page sells the current edition, JB/T 10000-2013. Earlier editions are listed for reference only.
How to Download JB/T 10000-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 7306.1-2000 — Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 1: Parallel internal and taper external threads
GB/T 7306.2-2000 — Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 2: Taper internal and external threads
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
Secure payment via Stripe
Payments accepted
JB/T 10000-2013
$149.00