JB/T 8364.3-2010Tools for taper pipe threads with 60°thread angle - Part 3: Taps for taper pipe threads with 60°thread angle - Technical specification (English PDF)
60°圆锥管螺纹刀具 第3部分：60°圆锥管螺纹丝锥 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8364.3-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 8364.3-2010 is the English-translated version of 60°圆锥管螺纹刀具 第3部分：60°圆锥管螺纹丝锥 技术条件.
The third part of the Chinese machinery industry standard on tools for taper pipe threads with a 60 degree thread angle, JB/T 8364.3-2010 is a recommended standard holding the technical specification for the taps.
It states the technical requirements for those taps along with the marking, the packaging and other basic requirements. Its application is to taps that cut 60 degree taper pipe threads of the NPT form in the thread sizes designated 1/16 to 2.
It quotes GB 443. The document replaces JB/T 8364.3-1996 and was issued by the Ministry of Industry and Information Technology, which files it under J41 and 25.100.50.
Found what you need?
Document preview — JB/T 8364.3-2010
National Standard of the People's Republic of China
- ICS
- 25.100.50
- Replacing
- JB/T 8364.3-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 8364.3-2010 was issued by MIIT on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 8364.3-1996.
It is one of 9 parts of the JB/T 8364 series.
2 Scope
The third part of the Chinese machinery industry standard on tools for taper pipe threads with a 60 degree thread angle, JB/T 8364.3-2010 is a recommended standard holding the technical specification for the taps. It states the technical requirements for those taps along with the marking, the packaging and other basic requirements. Its application is to taps that cut 60 degree taper pipe threads of the NPT form in the thread sizes designated 1/16 to 2. It quotes GB 443. The document replaces JB/T 8364.3-1996 and was issued by the Ministry of Industry and Information Technology, which files it under J41 and 25.100.50.
3 Normative references
JB/T 8364.3-2010 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 443
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8364.1-1996 — 60° taper pipe thread circular dies
JB/T 8364.1-2010 — Part 1: Circular screwing die for taper pipe threads with 60°thread angle
JB/T 8364.2-1996 — 60° taper pipe thread taps
JB/T 8364.2-2010 — Part 2: Taps for taper pipe threads with 60°thread angle
JB/T 8364.4-1996 — 60° taper pipe thread flat thread rolling dies
JB/T 8364.4-2010 — Part 4: Thread rolling flat dies for taper pipe threads with 60°thread angle
JB/T 8364.5-1996 — 60° taper pipe thread thread rolling wheels
JB/T 8364.5-2010 — 60° thread angle - Part 5: Thread rolling cylindrical dies for taper pipe threads with 60° thread angle
Other editions:
JB/T 8364.3-1996 (earlier edition)
6 Classification and status
International classification (ICS): 25.100.50
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 8364.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8364.3-2010 | Tools for taper pipe threads with 60°thread angle - Part 3: Taps for taper pipe threads with 60°thread angle - Technical specification | current edition | Current |
| JB/T 8364.3-1996 | Tools for taper pipe threads with 60°thread angle - Part 3: Taps for taper pipe threads with 60°thread angle - Technical specification | previous edition | Superseded |
This page sells the current edition, JB/T 8364.3-2010. Earlier editions are listed for reference only.
How to Download JB/T 8364.3-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 443-1989 — Lubri cating oils for total loss systems L-AN
JB/T 8364.4-2010 — Tools for taper pipe threads with 60°thread angle - Part 4: Thread rolling flat dies for taper pipe threads with 60°thread angle
JB/T 8364.2-1996 — 60° taper pipe thread taps
Secure payment via Stripe
Payments accepted
JB/T 8364.3-2010
$85.00