Valid

HJ 2514-2012Technical requirement for environmental labeling products. Vacuum cleaners (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (5 pages)

Need quotation for your management?

Get a formal quotation for HJ 2514-2012 in 30 minutes.

Issued by

Ministry of Ecology and Environment

Level / Type

National · Mandatory

Issue date

January 1, 1970

Implementation date

January 1, 1970

Scope

HJ 2514-2012 (Technical requirement for environmental labeling products. Vacuum cleaners) is available as an English-translated PDF.

HJ 2514-2012 — This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of vacuum cleaner environmental labeling products.

This standard applies to electric vacuum cleaners and water-absorbing cleaning appliances for household and similar purposes.

Found what you need?

Document preview — HJ 2514-2012

National Standard of the People's Republic of China

ICS
97.080
Classification
Y 62

Issued by: Ministry of Ecology and Environment

Contents

  • Foreword
  • 1 Scope of application
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Basic requirements
  • 5 Technical content
  • 5.1 Design requirements
  • 5.2 Production process requirements
  • 5.3 Product requirements
  • 5.4 Product Packaging Requirements
  • 5.5 Product Description Requirements
  • 6 Test methods

Foreword

To implement the Environmental Protection Law of the People's Republic of China, reduce the impact of vacuum cleaners on the environment and human health during production and use.

Sound, protect the environment, and develop this standard.

This standard applies to the ecological design of vacuum cleaners, energy consumption, noise, use of hazardous substances in materials, packaging, identification, and public information.

Data and recycling, etc. put forward corresponding requirements.

This standard is the first release.

This standard applies to China Environmental Labeling Product Certification.

This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.

This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center.

This standard was approved by the Ministry of Environmental Protection on March 30, 2012.

This standard has been implemented since June 1, 2012.

This standard is explained by the Ministry of Environmental Protection.

HJ ----201-

Environmental labeling product technical requirements vacuum cleaner

1 Scope of application

This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of vacuum cleaner environmental labeling products.

This standard applies to electric vacuum cleaners and water-absorbing cleaning appliances for household and similar purposes.

2 Normative references

The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.

GB/T 4214.2-2008 Household and similar electrical appliances - Test methods for noise - Particular requirements for vacuum cleaners GB/T 16288 logo for plastic products GB/T 18455 packaging recycling mark GB/T 21097.1-2007 Safety and service life of household and similar electrical appliances GB/T 26572 Limit requirements for restricted substances in electrical and electronic products QB 1562-1992 Vacuum cleaner

3 Terms and definitions

The following terms and definitions apply to this standard.

Vacuum cleaners

Mainly divided into vacuum cleaners and water-absorbing cleaning appliances, wherein the vacuum cleaner is driven by electric power to absorb dust, Wire and fiber utensils. A water absorbing cleaning appliance means an appliance for absorbing an aqueous solution which may contain a foaming detergent.

4 Basic requirements

4.1 Product quality and safety should meet the requirements of the corresponding product standards.

4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards.

4.3 Product manufacturers should strengthen clean production in the production process.

5 Technical content

5.1 Design requirements

5.1.1 The product adopts a detachable design.

5.1.2 The recycling rate of product components and materials should be at least 50% of the average quality of electrical appliances.

5.1.3 DecaBDE (DBDPO) and short chain chlorinated paraffins (SCCPs) shall not be used for plastic parts in the product.

5.1.4 The content of vinyl chloride monomer in the outer shell of the product shall not exceed 1mg/kg.

HJ ----201-

5.1.5 Product shell Plastic parts shall be marked in accordance with the requirements of GB/T 16288.

5.2 Production process requirements

5.2.1 The following solvents should not be used for cleaning during the production process. hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3), Trichloroethylene (C2HCl3), dichloroethane (CH3CHCl2), chloroform (CHCl3), n-hexane (C6H14), bromopropane (C3H7Br), Toluene (C7H8), xylene (C6H4 (CH3) 2).

5.2.2 Lead-free soldering process should be used during assembly and connection of product parts.

5.3 Product requirements

5.3.1 Product inhalation efficiency should be greater than 25%.

5.3.2 Product sound power level/noise shall not exceed 76dB (A).

5.3.3 Lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6), polybrominated biphenyls (PBBs), polybrominated diphenyl ethers in products (PBDEs) The content of six types of hazardous substances should meet the requirements of GB/T 26572.

5.4 Product Packaging Requirements

5.4.1 The content of vinyl chloride monomer should not exceed 1mg/kg.

5.4.2 Hydrochlorofluorocarbons (HCFCs) should not be used as blowing agents.

5.4.3 It should be marked in accordance with GB/T 18455.

5.5 Product Description Requirements

The following information should be included in the product description.

(1) Replace or empty when the dust collector or dust bag is full.

(2) Turn off the power when not in use.

(3) Information on various maintenance procedures.

(4) Information on product recycling and recycling.

6 Test methods

6.1 The calculation in Technical Content 5.1.2 is carried out in accordance with the method specified in GB/T 21097.1-2007.

6.2 The calculations in Technical Content 5.3.1 are carried out in accordance with the method specified in QB 1562-1992.

6.3 The test in 5.3.2 of the technical content shall be carried out in accordance with the method specified in GB/T 4214.2-2008.

6.4 Other indicators in the technical content are verified by means of document review combined with on-site inspection.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.

Referenced standards

How to Download HJ 2514-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
5 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HJ 2514-2012

$164.00