HJ 2505-2011Technical requirement for environmental labeling products. Mobile hard disk drive (English PDF)
This is a limited preview
Buy now to download the full PDF (3 pages)
Need quotation for your management?
Get a formal quotation for HJ 2505-2011 in 30 minutes.
Issued by
Ministry of Ecology and Environment
Level / Type
National · Mandatory
Issue date
March 2, 2011
Implementation date
April 1, 2011
Scope
HJ 2505-2011 (Technical requirement for environmental labeling products. Mobile hard disk drive) is available as an English-translated PDF.
HJ 2505-2011 — This standard specifies the terms and definitions, basic requirements, technical content and testing methods of mobile hard disk environmental labeling products. This standard applies to mobile hard disk products.
Found what you need?
Document preview — HJ 2505-2011
National Standard of the People's Republic of China
- ICS
- 35.220
- Classification
- L 64
Issued by: Ministry of Ecology and Environment
Contents
- Foreword
- 1 Scope of application
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements
- 5 Technical content
- 5.1 Product Design Requirements
- 5.2 Production process requirements
- 5.3 Product requirements
- 5.4 Packaging material requirements
- 5.5 Recycling and disposal requirements
- 5.6 Public information requirements
- 6 Test methods
Foreword
To implement the Environmental Protection Law of the People's Republic of China, reduce the impact of mobile hard disk on the environment and human health during production and use.
Sound, protect the environment, and develop this standard.
This standard sets environmental requirements for the design, production process, products, recycling and handling, packaging materials and public information of mobile hard drives.
This standard is the first release.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center.
This standard was approved by the Ministry of Environmental Protection on March 2, 2011.
This standard has been implemented since April 1, 2011.
This standard is explained by the Ministry of Environmental Protection.
Environmental labeling product technical requirements mobile hard disk
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical content and testing methods of mobile hard disk environmental labeling products.
This standard applies to mobile hard disk products.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB/T 18455 packaging recycling mark SJ/T 11363 Limitation requirements for toxic and hazardous substances in electronic information products
3 Terms and definitions
The following terms and definitions apply to this standard.
Mobile hard disk drive A portable data storage device. The device is mainly used for data storage, and the magnetic medium hard disk is used as a storage carrier.
The communication method determined by the USB interface or the like is connected to a data processing device such as a computer, and the data access and management functions are conveniently completed.
4 Basic requirements
4.1 Product quality should meet the requirements of the corresponding product quality standards.
4.2 Pollutant emissions from product manufacturing enterprises shall comply with national or local standards for pollutant discharge.
4.3 Product manufacturers should strengthen clean production in the production process.
5 Technical content
5.1 Product Design Requirements
5.1.1 The product adopts a detachable design.
5.1.2 DecaBDE (DBDPO) and short chain chlorinated paraffins (SCCPs) shall not be used for plastic parts in the product.
5.2 Production process requirements
The production process shall not use hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3), trichloroethylene (C2HCl3), Dichloroethane (CH3CHCl2), chloroform (CHCl3), bromopropane (C3H7Br), n-hexane (C6H14), toluene (C7H8), two Toluene (C6H4(CH3)2).
5.3 Product requirements
Lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6), polybrominated biphenyls (PBBs) and polybrominated diphenyls in products and product components the limits for six hazardous substances (PBDEs) should meet the requirements of SJ/T 11363, with the following exceptions.
a) lead in high melting point solders;
b) lead in electronic ceramic components;
c) The lead content in the steel alloy does not exceed 0.35%, the lead content in the aluminum alloy does not exceed 0.4%, and the lead content in the copper alloy does not exceed 4%.
5.4 Packaging material requirements
5.4.1 The content of vinyl chloride monomer shall not exceed 1 mg/kg.
5.4.2 Hydrochlorofluorocarbons (HCFCs) should not be used as blowing agents.
5.4.3 It should be marked in accordance with GB/T 18455.
5.5 Recycling and disposal requirements
Enterprises should establish waste product recycling and recycling treatment systems to provide information on product recycling and recycling.
5.6 Public information requirements
Product recycling information should be included in the public information.
6 Test methods
The technical content is verified by means of document review combined with on-site inspection.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 3 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download HJ 2505-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 18455-2022 — Packaging recycling marking
HJ 212-2025 — Technical requirements for data transmission of pollutant automatic monitoring and surveillance systems
HJ 1322-2023 — Technical specification for emission remote supervision system of non-road mobile machinery
Secure payment via Stripe
Payments accepted
HJ 2505-2011
$114.00