Valid

HG/T 4845-2015Cold-applied zinc coatings (English PDF)

冷涂锌涂料

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4845-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 14, 2015

Implementation date

January 1, 2016

Scope

HG/T 4845-2015 is the English-translated version of 冷涂锌涂料.

HG/T 4845-2015 is a recommended standard of the Chinese chemical industry covering cold-applied zinc coatings. It specifies their requirements and the test methods, inspection rules, marking, packaging and storage that go with them.

The products in its scope are single-component organic coatings of high zinc content, applied at ambient temperature and made up of zinc powder, organic resin, solvent and other components; their main uses are cathodic protection of exposed steel surfaces and repair of damaged coated or sprayed zinc layers.

Multi-component zinc-rich primers are excluded. Cited documents include GB/T 1731-1993, GB/T 5210-2006, GB/T 6890-2012, GB/T 8923.1, GB/T 13288.1 and HG/T 3668-2009. Issued on 14 July 2015, it has applied since 1 January 2016.

Found what you need?

Document preview — HG/T 4845-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 4845-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese chemical industry covering cold-applied zinc coatings. It specifies their requirements and the test methods, inspection rules, marking, packaging and storage that go with them. The products in its scope are single-component organic coatings of high zinc content, applied at ambient temperature and made up of zinc powder, organic resin, solvent and other components; their main uses are cathodic protection of exposed steel surfaces and repair of damaged coated or sprayed zinc layers. Multi-component zinc-rich primers are excluded. Cited documents include GB/T 1731-1993, GB/T 5210-2006, GB/T 6890-2012, GB/T 8923.1, GB/T 13288.1 and HG/T 3668-2009.

HG/T 4845-2015 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content

GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties

GB/T 1731-1993 — Determination of flexibility of films

GB/T 1732-1993 — Determination of impact resistance of film

GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats

GB/T 1771-2007 — Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)

GB/T 3186

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

GB/T 6890-2012 — Zinc powder

GB/T 8170

GB/T 8923.1

GB/T 9271-2008 — Paints and varnishes standard panels for testing

GB/T 9278

GB/T 9286-1998 — Paints and varnishes--Cross cut test for films

GB/T 9750

GB/T 13288.1

GB/T 13452.2-2008 — Paints and varnishes -- Determination of film thickness

GB/T 13491

HG/T 3668-2009 — Zinc-rich primers

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks

GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

HG/T 4846-2015 — Waterborne inorganic phosphate solvent-resistant anticorrosive coatings

HG/T 4844-2015 — Low zinc primers

HG/T 4842-2015 — Elastic emulsions for architectural coatings

6 Classification and status

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

How to Download HG/T 4845-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4845-2015

$95.00