HG/T 4843-2015Precoated coil coatings for household appliances (English PDF)
家电用预涂卷材涂料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4843-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 4843-2015 is the English-translated version of 家电用预涂卷材涂料.
HG/T 4843-2015 is the recommended Chinese chemical industry standard covering precoated coil coatings for household appliances. It classifies these products, states the requirements, and lays down the test methods, the inspection rules and the rules for marking, packaging and storage.
The coatings concerned are solvent-based organic paints prepared from resin, pigments, extender pigments, additives and solvents in set proportions and applied to appliance metal sheet on a continuous coil coating line, for use on the metal panels of many kinds of domestic appliance.
Its test base is extensive and includes GB/T 1733-1993, GB/T 1735-2009, GB/T 9286-1998, GB/T 9754-2007, GB/T 20624.2-2006, GB/T 23987-2009, GB/T 30791-2014 and ISO 6270-2-2005. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 4843-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4843-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard covering precoated coil coatings for household appliances. It classifies these products, states the requirements, and lays down the test methods, the inspection rules and the rules for marking, packaging and storage. The coatings concerned are solvent-based organic paints prepared from resin, pigments, extender pigments, additives and solvents in set proportions and applied to appliance metal sheet on a continuous coil coating line, for use on the metal panels of many kinds of domestic appliance. Its test base is extensive and includes GB/T 1733-1993, GB/T 1735-2009, GB/T 9286-1998, GB/T 9754-2007, GB/T 20624.2-2006, GB/T 23987-2009, GB/T 30791-2014 and ISO 6270-2-2005.
HG/T 4843-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB/T 1723-1993 — Determination of viscosity of coatings
GB/T 1724-1979 — Methods of test for fineness of grind of paints
GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content
GB/T 1733-1993 — Determination of resistance to water of films
GB/T 1735-2009 — Paints and varnishes -- Determination of heat resistance
GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats
GB/T 1771-2007 — Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)
GB/T 2518-2008 — Continuously hot-dip zinc-coated steel sheet and strip
GB/T 3186
GB/T 6739-2006 — Paints and varnishes - Determination of film hardness by pencil test
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9274-1988 — Paints and varnishes - Determination of resistance to liquids
GB/T 9278
GB/T 9286-1998 — Paints and varnishes--Cross cut test for films
GB/T 9750
GB/T 9753-2007 — Paints and varnishes -- Cupping test
GB/T 9754-2007 — Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20-degree, 60-degreeand 85-degree
GB/T 13452.2-2008 — Paints and varnishes -- Determination of film thickness
GB/T 13491
GB/T 15608
GB/T 20624.2-2006 — Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter
GB/T 23987-2009 — Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV lamps and water
GB/T 23989-2009 — Determination for the solvent resistance of coatings by solvent rubs
GB/T 26125-2011 — Electrical and electronic products -- Determination of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
GB/T 30791-2014 — Paints and varnishes -- T-bend test
ISO 6270-2-2005
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
HG/T 4845-2015 — Cold-applied zinc coatings
HG/T 4844-2015 — Low zinc primers
HG/T 4842-2015 — Elastic emulsions for architectural coatings
6 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1723-1993Determination of viscosity of coatings
- GB/T 1724-1979Paints, varnishes and printing inks - Determination of fineness of grind
- GB/T 1725-2007Paints, varnishes and plastics -- Determination of non-volatile-matter content
- GB/T 1733-1993Determination of resistance to water of films
- GB/T 1735-2009Paints and varnishes — Determination of heat resistance
- GB/T 1766-2008Paints and Varnishes – Rating Schemes of Degradation of Coats
ISO 6270-2-2005
Similar standards
How to Download HG/T 4843-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 4843-2015
$195.00