HG/T 4667-2014Nylon-lined latex protective work gloves (English PDF)
锦纶衬里劳保胶乳手套
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4667-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 14, 2014
Implementation date
April 1, 2015
Scope
HG/T 4667-2014 is the English-translated version of 锦纶衬里劳保胶乳手套.
HG/T 4667-2014 is the Chinese chemical industry standard for labour protection gloves made of rubber latex over a nylon, or chinlon, lining. It sets the requirements for the gloves and the test methods that verify them, together with the inspection rules and the provisions for packaging, labelling, transport and storage.
The gloves in its scope are latex gloves formed over a knitted liner and worn as hand protection at work. Sampling for inspection is taken from GB/T 2828.1-2012, accelerated ageing follows GB/T 3512-2001, and the transport marks follow GB/T 191-2008. Issued on 14 October 2014, it has applied since 1 April 2015.
Found what you need?
Document preview — HG/T 4667-2014
National Standard of the People's Republic of China
- ICS
- 13.340.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4667-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 October 2014 and has been in force since 1 April 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for labour protection gloves made of rubber latex over a nylon, or chinlon, lining. It sets the requirements for the gloves and the test methods that verify them, together with the inspection rules and the provisions for packaging, labelling, transport and storage. The gloves in its scope are latex gloves formed over a knitted liner and worn as hand protection at work. Sampling for inspection is taken from GB/T 2828.1-2012, accelerated ageing follows GB/T 3512-2001, and the transport marks follow GB/T 191-2008.
HG/T 4667-2014 falls under ICS 13.340.40, in the field of environment and health protection, safety.
This catalogue holds 95 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 10213-2025 — Single-use medical rubber examination gloves
HG/T 3055-2012 — Latex foam - Determination of apparent density
GB/T 12825-2003 — polymeric materials, cellular flexible -- Determination of hardness by indentation technique
HG/T 4666-2023 — Latex foam
HG/T 4663-2014 — Latex for polyester filament base fabrics
HG/T 4662-2014 — Latex products for sphygmomanometers
6 Classification and status
International classification (ICS): 13.340.40
Chinese Standard Classification (CCS): G 44
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3512-2001Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
Similar standards
How to Download HG/T 4667-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
HG/T 4667-2014
$40.00