HG/T 4618-2014Rubber squeeze rolls for cold-rolled strip (English PDF)
冷轧橡胶挤干辊
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4618-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 4618-2014 is the English-translated version of 冷轧橡胶挤干辊.
The rubber squeeze rolls used on cold-rolled strip are the subject of HG/T 4618-2014, a recommended standard issued for the Chinese chemical industry.
It describes the structure of these rolls as used in the metallurgical industry for cold rolling, and then sets the product marking, the requirements, the test methods and the inspection rules, closing with signs, packaging, transport and storage.
Its application extends to rolls of every kind of this sort. It quotes GB/T 528, GB/T 531.1, GB/T 1689, GB/T 1690, GB/T 15254, HG/T 2413.2 and HG/T 3079. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 4618-2014
National Standard of the People's Republic of China
- ICS
- 83.140.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4618-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The rubber squeeze rolls used on cold-rolled strip are the subject of HG/T 4618-2014, a recommended standard issued for the Chinese chemical industry. It describes the structure of these rolls as used in the metallurgical industry for cold rolling, and then sets the product marking, the requirements, the test methods and the inspection rules, closing with signs, packaging, transport and storage. Its application extends to rolls of every kind of this sort. It quotes GB/T 528, GB/T 531.1, GB/T 1689, GB/T 1690, GB/T 15254, HG/T 2413.2 and HG/T 3079.
HG/T 4618-2014 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528
GB/T 531.1
GB/T 1689
GB/T 1690
GB/T 4459.5-1999 — Mechanical drawings. Representation of centre holes
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 11211
GB/T 15254
HG/T 2413.2
HG/T 3078-2001 — Rubber- or plastics-covered rollers - Surface characteristics
HG/T 3079
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 4612-2023 — Tear-resistant dipped steel cord fabric for conveyor belts
HG/T 4619-2014 — Synthetic rubber surfaces for fitness grounds
HG/T 4613-2014 — Dipped dam fabric for rubber dams
6 Classification and status
International classification (ICS): 83.140.99
Chinese Standard Classification (CCS): G 47
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 1689Rubber vulcanized-Determination of abrasion resistance (Akron machine)
- GB/T 1690Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 4459.5-1999Mechanical drawings. Representation of centre holes
- GB/T 9239.1-2006Mechanical vibration—Rotor balancing—Part 1:Introduction
Similar standards
How to Download HG/T 4618-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11211-1989 — Rubber vulcanized--Determination of adhesion to metal--Tension method
GB/T 11211-2009 — Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method
GB/T 15254-1994 — Rubber, vulcanized--Determination of adhesion to metal-180 Degree Peel test method
HG/T 4618-2014
$145.00