HG/T 4488-2012Calculation method of nitrous oxide (N2O) emissions for nitric acid producers (English PDF)
硝酸生产企业氧化亚氮(N2O)排放量的计算方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4488-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 4488-2012 is the English-translated version of 硝酸生产企业氧化亚氮(N2O)排放量的计算方法.
HG/T 4488-2012 is the recommended Chinese chemical industry standard giving the method for calculating nitrous oxide emissions from nitric acid production.
It provides the terms and definitions used for N2O emissions by nitric acid producers, the basic principles of the calculation, the boundary it must take in, and the calculation methods themselves.
The standard is applicable to nitrous oxide emissions across the whole of the nitric acid production process. ISO 14064-1 is called up as its reference document.
Sitting under the greenhouse gas heading of the international classification, it is one of the emission accounting standards of the sector. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 4488-2012
National Standard of the People's Republic of China
- ICS
- 13.020.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4488-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard giving the method for calculating nitrous oxide emissions from nitric acid production. It provides the terms and definitions used for N2O emissions by nitric acid producers, the basic principles of the calculation, the boundary it must take in, and the calculation methods themselves. The standard is applicable to nitrous oxide emissions across the whole of the nitric acid production process. ISO 14064-1 is called up as its reference document. Sitting under the greenhouse gas heading of the international classification, it is one of the emission accounting standards of the sector.
HG/T 4488-2012 falls under ICS 13.020.10, in the field of environment and health protection, safety.
This catalogue holds 95 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
ISO 14064-1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 17145-2024 — Guidelines for recycling of used mineral oil
HG/T 5871-2021 — Technical specification for green-design product assessment - Polyethylene terephthalate (PET) resin
HJ/T 331-2006 — Specifications for environmental protection product. Catalytic converters for petrol vehicles
HG/T 6501-2026 — Technical specification for low concentration carbon dioxide capture
HG/T 6378-2025 — Determination methods for phosphite and total phosphorus in spent electroless nickel-plating baths
HG/T 4487-2012 — Calculation method for carbon dioxide (CO2) emissions of synthetic ammonia production enterprises
6 Classification and status
International classification (ICS): 13.020.10
Chinese Standard Classification (CCS): Z 04
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 14064-1
Similar standards
How to Download HG/T 4488-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 4488-2012
$165.00