HG/T 4377-2012Floating upward-flow filters (English PDF)
浮动上滤式过滤器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4377-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 4377-2012 is the English-translated version of 浮动上滤式过滤器.
The floating upward-flow filter is the subject of HG/T 4377-2012, a recommended Chinese chemical industry standard. It gives terms and definitions, the naming of the equipment, its structure and basic parameters, and then the requirements, test methods, inspection rules, signs, packaging, storage and transport.
The filters it applies to are vessels used in water treatment service. Classification places it at G93 in China and under 71.120.10 and 75.180.20 internationally, among chemical process equipment.
Because the units are pressure vessels it is cited with the GB 150 series, along with GB/T 191, GB/T 710, GB/T 8923, GB/T 13306 and the HG/T 21514 to HG/T 21519 group of fittings standards. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 4377-2012
National Standard of the People's Republic of China
- ICS
- 71.120.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4377-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The floating upward-flow filter is the subject of HG/T 4377-2012, a recommended Chinese chemical industry standard. It gives terms and definitions, the naming of the equipment, its structure and basic parameters, and then the requirements, test methods, inspection rules, signs, packaging, storage and transport. The filters it applies to are vessels used in water treatment service. Classification places it at G93 in China and under 71.120.10 and 75.180.20 internationally, among chemical process equipment. Because the units are pressure vessels it is cited with the GB 150 series, along with GB/T 191, GB/T 710, GB/T 8923, GB/T 13306 and the HG/T 21514 to HG/T 21519 group of fittings standards.
HG/T 4377-2012 falls under ICS 71.120.10, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150.1
GB 150.2
GB 150.3
GB 150.4
GB/T 191
GB/T 710
GB/T 6388
GB/T 8923
GB/T 12671
GB/T 12672
GB/T 13306
GB/T 13922.3
GB/T 19678
GB 24511
CJ/T 217
CJ/T 261
HG/T 21514
HG/T 21515
HG/T 21516
HG/T 21517
HG/T 21518
HG/T 21519
HG/T 2152
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 5108-2026 — Stainless steel small-diameter tube bundle spiral wound heat exchangers
HG/T 4754-2026 — Specifications for steel fermentation vessels
HG/T 2650-2026 — Tubular heat exchangers
6 Classification and status
International classification (ICS): 71.120.10
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150.1Pressure vessels—Part 1:General requirements
- GB 150.2Pressure Vessels-Part 2: Materials
- GB 150.3Pressure Vessels -Part3: Design
- GB 150.4Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 710Hot-rolled quality carbon structural steel sheets and strips
Similar standards
How to Download HG/T 4377-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
CJ/T 217-2005 — Compound quick air inbreathe-release valve for water supply pipeline
CJ/T 217-2013 — Compound quick air inbreathe-release valve for water supply pipeline
CJ/T 261-2007 — Buterfly valves for water supply and drainage
HG/T 4377-2012
$105.00