HG/T 4337-2012Solvent-free liquid epoxy coatings for steel water pipelines (English PDF)
钢质输水管道无溶剂液体环氧涂料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4337-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 4337-2012 is the English-translated version of 钢质输水管道无溶剂液体环氧涂料.
HG/T 4337-2012 is the recommended Chinese chemical industry standard for solvent-free liquid epoxy coatings used on steel water pipelines. It classifies these coatings and then sets the requirements, the test methods, the inspection rules and the provisions for signs, packaging and storage.
The coatings concerned are those used to protect steel pipe carrying fresh water against corrosion. A long list of paint and coating test standards is quoted and applied with it, among them GB/T 1725-2007, GB/T 1733-1993, GB/T 5210-2006, GB/T 9274-1988 and SY/T 0315-2005.
Chinese classification G51 and international classification 87.040 place it with protective paints. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 4337-2012
National Standard of the People's Republic of China
- ICS
- 87.040
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4337-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for solvent-free liquid epoxy coatings used on steel water pipelines. It classifies these coatings and then sets the requirements, the test methods, the inspection rules and the provisions for signs, packaging and storage. The coatings concerned are those used to protect steel pipe carrying fresh water against corrosion. A long list of paint and coating test standards is quoted and applied with it, among them GB/T 1725-2007, GB/T 1733-1993, GB/T 5210-2006, GB/T 9274-1988 and SY/T 0315-2005. Chinese classification G51 and international classification 87.040 place it with protective paints.
HG/T 4337-2012 falls under ICS 87.040, in the field of paint and colour industries.
This catalogue holds 140 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content
GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties
GB/T 1733-1993 — Determination of resistance to water of films
GB/T 1768-2006 — Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
GB/T 3186
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
GB/T 6753.1-2007 — Paints, varnishes and printing inks - Determination of fineness of grind
GB/T 8170
GB/T 8923
GB/T 9271
GB/T 9274-1988 — Paints and varnishes - Determination of resistance to liquids
GB/T 9278
GB/T 9750
GB/T 13288.1
GB/T 13491
SY/T 0315-2005 — Technological standard of FBE external fusion bonded epoxy coating for steel pipeline
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 3952-2007 — Cathodic electrodeposition coatings
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
HG/T 4343-2024 — Waterborne multicolor architectural coatings
HG/T 4339-2024 — Coatings for machinery and equipment
HG/T 4346-2022 — Chlorinated rubber resins for coatings
6 Classification and status
International classification (ICS): 87.040
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1725-2007Paints, varnishes and plastics -- Determination of non-volatile-matter content
- GB/T 1728-1979Determination of drying time of coating and putty films
- GB/T 1733-1993Determination of resistance to water of films
- GB/T 1768-2006Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
- GB/T 3186Paints, varnishes and raw materials for paints and varnishes -- Sampling
- GB/T 5210-2006Paints and varnishes -- Pull-off test for adhesion
Similar standards
How to Download HG/T 4337-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13288.1-2008 — Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment
GB/T 13491-1992 — General rule for packing of coatings
GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content
HG/T 4337-2012
$105.00