Valid

HG/T 4301-2012Rubber - Test method for mould resistance (English PDF)

橡胶防霉性能测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4301-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 24, 2012

Implementation date

November 1, 2012

Scope

HG/T 4301-2012 is the English-translated version of 橡胶防霉性能测试方法.

HG/T 4301-2012 is the recommended chemical industry standard giving a test method for the resistance of rubber to fungi. It sets out how the mould performance of rubber materials and products is tested and how the result is evaluated.

Its scope is rubber materials and products, and other polymer materials may be handled in the same way; the standard does not deal with evaluating the safety of a mouldy product.

It was prepared as a non-equivalent adoption of ASTM G21-2009 and is used with GB/T 2941, GB/T 6682 and YY 0569-2005. Issued on 24 May 2012, it has applied since 1 November 2012.

Found what you need?

Document preview — HG/T 4301-2012

National Standard of the People's Republic of China

ICS
83.060

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 4301-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended chemical industry standard giving a test method for the resistance of rubber to fungi. It sets out how the mould performance of rubber materials and products is tested and how the result is evaluated. Its scope is rubber materials and products, and other polymer materials may be handled in the same way; the standard does not deal with evaluating the safety of a mouldy product. It was prepared as a non-equivalent adoption of ASTM G21-2009 and is used with GB/T 2941, GB/T 6682 and YY 0569-2005.

HG/T 4301-2012 falls under ICS 83.060, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 2941

GB/T 6682

YY 0569-2005 — Biological safety cabinets

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods

GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering

GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method

HG/T 3866-2026 — Vulcanized rubber-Determination of coefficient of cold resistance under compression

HG/T 2196-2026 — Standard classification system for rubber products in automotive application

HG/T 4300-2012 — Rubber - Determination of rheological properties - Piston capillary rheometer method

6 Classification and status

International classification (ICS): 83.060

Chinese Standard Classification (CCS): G 40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4301-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4301-2012

$85.00