Valid

HG/T 4285-2011Circular soda-lime glass sight glasses for pressure vessels (English PDF)

压力容器用圆形钠钙玻璃视镜

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4285-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4285-2011 is the English-translated version of 压力容器用圆形钠钙玻璃视镜.

HG/T 4285-2011 is a recommended chemical industry standard for circular soda-lime glass sight glasses used on pressure vessels. It covers the marking of the product, the material, the requirements, the test methods and the inspection rules, and ends with marking, packaging, transport and storage.

The sight glasses concerned are physically strengthened and are fitted to the observation openings of steel pressure vessels and piping.

In continuous contact with a flowing fluid the temperature reaches 150 °C, use below ambient temperature is not excluded, and with alkaline solutions the maximum temperature does not exceed 100 °C. It is a non-equivalent adoption of DIN 8902-1996 and quotes GB/T 5137.2, GB/T 6579-2007, GB/T 6580, GB/T 6581, GB/T 6582, GB/T 16920 and ASTM C601-1985 (2010). Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4285-2011

National Standard of the People's Republic of China

ICS
71.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4285-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended chemical industry standard for circular soda-lime glass sight glasses used on pressure vessels. It covers the marking of the product, the material, the requirements, the test methods and the inspection rules, and ends with marking, packaging, transport and storage. The sight glasses concerned are physically strengthened and are fitted to the observation openings of steel pressure vessels and piping. In continuous contact with a flowing fluid the temperature reaches 150 °C, use below ambient temperature is not excluded, and with alkaline solutions the maximum temperature does not exceed 100 °C. It is a non-equivalent adoption of DIN 8902-1996 and quotes GB/T 5137.2, GB/T 6579-2007, GB/T 6580, GB/T 6581, GB/T 6582, GB/T 16920 and ASTM C601-1985 (2010).

HG/T 4285-2011 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 5137.2

GB/T 6579-2007 — Laboratory glassware -- Thermal shock and thermal shock endurance test methods

GB/T 6580

GB/T 6581

GB/T 6582

GB/T 16920

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment

GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing

HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting

HG/T 4286-2017 — Glass-lined heat exchange tubes

HG/T 4278-2011 — Lightweight ceramic packings for chemical equipment towers

HG/T 4277-2011 — Plastic-lined steel tower vessels - Technical specifications

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 94

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4285-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4285-2011

$290.00